GZV Magnetic Vibrating Feeder , Gzv Mini Vibrating Feeders , Small
Vibrating Feeder
Introduction
Electromagnetic vibrating feeder (hereinafter referred to electric
vibration machine) is an advanced feeding device, it is suitable
for the requirements of continuous production. In the production
process can be mistaking the viscosity of the material or powder
material from the storage silos or quantitative, uniform,
continuously sent to the device. I company of the equipment has
been widely used in cement, mining, metallurgy, coal, chemical
industry, construction, docks and pharmaceutical, tea processing,
ceramics and other industrial sectors.
Product Description
1. GZV Magnetic Vibrating Feeder , Gzv Mini Vibrating Feeders , Small
Vibrating Feeder is the machine which can orient and feed small
parts to the assembly line by vibration.
2. GZV Magnetic Vibrating Feeder , Gzv Mini Vibrating Feeders , Small
Vibrating Feeder is a new type of feeding equipment , using
electromagnetic exciter as the vibration source to drive hopper
trough work. It features smooth vibrating, reliable operation, long
service life and being suitable for feeding.
Application
GZV Magnetic Vibrating Feeder , Gzv Mini Vibrating Feeders , Small
Vibrating Feeder are widely used in mining, metallurgy, coal,
building materials, light industry, chemical industry, machinery
industry and agriculture. It is also suitable for automated
batching and quantitative packaging and production process
automation systems.
Characteristics
1. The feeder in the course of continuous feeding thrown the parts
up, so to wear small trough.
2. In order to reduce the noise and improve life and feed
efficiency, the inside of the bowl is usually coated by urethane.
3. The utility model has the advantages of small size, light
weight, simple structure, convenient installation and low operating
cost.
4. The use of half wave rectifier control, can be used in the
stepless adjustment.
5. The vibrators are controlled by control boxes.
Use and installation
1. In order to ensure the normal operation of feeder,Should pay
attention to several points in the installation of hopper.
2. The outlet and the feed tank should have 5mm gap,Ensure the
hopperis not affected by the process of feeding.
Chute exit should design oblique,To avoid the vertical pressure
direct pressure on the feeder,Otherwise it will seriously affect
the efficiency of feeder.
3. The size of the opening of the hopper shall be guaranteed to
obtain sufficient material,In order to adjust the number of
materials should be set gate.
4. Vibrating feeder for seat type structure,Install flat on the
support plate.
Advantage
1. Small size, light weight, simple structure, convenient
installation, no rotating parts so no need lubrication, convenient
maintenance and low operating cost.
2. Due to Electromagnetic vibrating feeder uses the resonance
principle of mechanical vibration, the double mass works in a low
critical resonance state, thus consuming less electric energy.
3. Since the current can be instantaneously changed, opened and
closed, so the feeding amount has a high precision.
4.The control equipment of this series of electro-vibration
machines can easily adjust the feeding amount during use, and can
realize centralized control and automatic control of the production
process.
5. Since the material in the feed tank is continuously thrown up
during the feeding process and jumps forward according to the
trajectory of the parabola, the wear of the feed tank is small.
6. This series of vibrating machines is not suitable for
applications with explosion-proof requirements.
Main Features
GZV Magnetic Vibrating Feeder , Gzv Mini Vibrating Feeders , Small
Vibrating Feeder is a new type of feeding equipment, which has the
following characteristics compared with other feeding equipment:
1. small size, light weight, simple structure, easy installation
and low operating cost;
2. Due to the mechanical vibration resonance principle, the power
consumption is small;
3. Using thyristor half-wave rectification power supply, the feed
amount can be adjusted steplessly during use;
4. The feeder continuously throws the material during the feeding
process, so the wear of the feed tank is small.
Model Selection
| Model | GZV 1 | GZV 2 | GZV 3 | GZV 4 | GZV 5 | GZV 6 |
| Capacity(t/h) | 0.1 | 0.5 | 1 | 2 | 4 | 6 |
| Double Amplitude | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 | 1.5 |
| Frequency(r/m) | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 |
| Power(W) | 5 | 8 | 20 | 25 | 30 | 50 |
| Weight kg) | 4 | 7 | 12 | 18 | 27 | 45 |
| Voltage(V) | 220 | 220 | 220 | 220 | 220 | 220 |
