4 Holes Dental Handpiece Turbines No Revolving Vibration For
Chemical lab Use
Features:
This complete kit includes low speed handpiece contra angle model,
low speed handpiece straight model and low speed dental air motor.
- E-type connector
- Wrench type
- Precise technology, Steady, no vibration while revolving,
offering a steady operation.
- Suitable for any E-type handpiece accords with ISO standard
- 135°C Autoclavable, suitable for both steam and chemical
autoclave
Contra angle handpiece
- Low Speed 22,000-27,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm
- Fastening of the instruments with a turning latch
- Autoclavable 135°C
- For any lab or E-type motors
Straight Nosecone
- Working pressure: 0.3MPa
- 0.25MPa(Measure meter is installed at the end of air motor to
measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise
or anticlockwise)
- Noise: ≤68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.
Air Motor EX-203C
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- Borden 2 holes/Midwest 4 holes
- Max speed 20,000 min-1
Packing List:
- E-type air motor EX-203C 4-hole: 1 each
- Straight nose cone: 1 each
- Contra Angle handpiece: 1 each
- Water spray nozzle: 1 each
- Oil spray nozzle: 1 each
- CAP Spanner: 1 each
- English manual: 1 each
Statement :
The following FDA Disclaimer is required for all eBay listing in
Healthcare category and is included for REFERENCE:
The sale of this item may be subject to regulation by the U.S. Food
and Drug Administration and state and local regulatory agencies. If
so, do not bid on this item unless you are an authorized purchaser.
If the item is subject to FDA regulation,We will verify your status
as an authorized purchaser of this item before shipping of the item
