None-woven Melt blown cloth for / cloth/ Slitting Machine
Detail description: suitable for cloth, Melt blown for , Non-woven
fabric for slitting and rewinding.
FABRIC SLITTING MACHINE
This machine is made of fabric steel structure in which the fabric
let off, liner winding,Main spindle, Cutter Shaft and Finish Reel
Units are assembled. The Structure is be of rigid type to with
stand the load exerted by the drives.
The rubberized fabric let of unit consists of the let off shaft,
the winding shaft for liner and web aligner.
The let off and liner winding shaft is of square type, (32 mm)
easily removable shaft with safety chuck arrangement for loading
and unloading the slitted rolls.
Characteristics:
1. The two rewinding motors cooperate with the main motor to work
as three motors motion control, the main motor blocks the unwinding
and the rewinding motor control the tension, the tension of the
finished product is stable, good rewinding appearance.
2. The rewinding arm adopts the pneumatic coupling control the
balance, the contact pressure can be adjusted automatically during
rewinding, the contact pressure can be set. This machine can also
be equipped with discontinuous rewinding, cut other materials more
widely.
3. The operation interface adopts LCD touch screen, various
rewinding conditions and working conditions can be set directly on
the screen, the control part adopts PLC to control the machine
operation, with self-test system.
4. The machine drive uses AC motor and frequency inverter;
acceleration and deceleration are stable and fast.
5. Optional with slat type air pressure shaft and pneumatic
friction shaft, suitable for more material range, the shaft change
is specially designed, can be change at any time.
6. Auxiliary discharge device, the material outfeed pass surface
impression roll, material more even, and reduce the noise (suitable
for adhesive material)
7. Separate type unwinding stand, for bigger unwinding diameter.
