Melt blown Fabric For / Fabric / Non-woven Melt Blown /
Polypropylene Slitting Macchine
Detail description: suitable for cloth, Melt blown for , Non-woven
fabric for slitting and rewinding.
Characteristics:
1. The two rewinding motors cooperate with the main motor to work
as three motors motion control, the main motor blocks the unwinding
and the rewinding motor control the tension, the tension of the
finished product is stable, good rewinding appearance.
2. The rewinding arm adopts the pneumatic coupling control the
balance, the contact pressure can be adjusted automatically during
rewinding, the contact pressure can be set. This machine can also
be equipped with discontinuous rewinding, cut other materials more
widely.
3. The operation interface adopts LCD touch screen, various
rewinding conditions and working conditions can be set directly on
the screen, the control part adopts PLC to control the machine
operation, with self-test system.
4. The machine drive uses AC motor and frequency inverter;
acceleration and deceleration are stable and fast.
5. Optional with slat type air pressure shaft and pneumatic
friction shaft, suitable for more material range, the shaft change
is specially designed, can be change at any time.
6. Auxiliary discharge device, the material outfeed pass surface
impression roll, material more even, and reduce the noise (suitable
for adhesive material)
7. Separate type unwinding stand, for bigger unwinding diameter.
Automatic models are PLC controlled with auto positioning and
cutting.
These types of slitters are ideal for cutting various types of
materials. Materials that can be slit include
double-sided adhesive tape
self-adhesive tape
application tape
vinyl
rubber
gasket
foam
PVC and many other materials.
Roll slitters have several advantages over slitter rewinders,
including:
Very fast set up
Make single cuts very fast
No need to have pre-cut cores
Lower machine investment
Watch this video of a manual Band Slitter in operation.
