Plastic Bottle Packaging Machine PET / PP Bottle Packing Equipment
Carton packing machine description:
Bottle Delivery part:
Bottles are delivered by product conveyor: It is composed of thermoplastic material chain plate with low
friction coefficient.
Detection part:Inverted/missing bottle detection at bottle inlet
part.
Packing part:
Bottle dividing device: Bottles are divided by pneumatic device.
Bottle falling device: Bottles falling is controled by pneumatic device.
Carton falling device: Carton box falling is controlled by servo
system.
Box conveying system:Servo motor is used to drive the chain
transport box.
Carton bonding device: Adopt imported hot melt glue machine to
spray glue and pneumatic pressure combination.
Paper feeder part:
Paper suction device: It uses vacuum suction board imported from
Germany.
Paper feeding device: Pneumatic push combined with motor transport
(with anti-rebound device).
Control system:
Adopt pneumatic servo control system: Schneider from French
Carton packing machine features:
According to the running speed of uniform adhesive, electronic
adjustment of adhesive length. Simple man-machine interface operation and multiple protection, no
need too much manual labor, which can save a lot of production cost
for customer. Standard chain and hot sol device; Adapt to a variety of bottle,
easy to adjust, if customer has more types product, our machine can
finish the packing well. Compared with the traditional carton, it can save about 20-30% of
the carton area, save the raw materials, save the cost. Improve production efficiency, save labor, and replace manual
unpacking safely. Manual packing, sealing and other procedures. Use hot melt seal box instead of traditional seal tape, in line
with environmental hygiene.
Carton packing machine parameters:
| No | Item | Parameter |
| 1 | Voltage | 380V/220V 50HZ |
| 2 | Max power consumption | 10 KW |
| 3 | Compressed air cupply | 4-6kgf/cm |
| 4 | Production capacity | About 20 package per min |
| 5 | Machine size | L*W*H 7000*2830*2016mm |
| 6 | Weight | 3500kg |
| 7 | Suitable product | Glass bottle, Pet bottle, Tin can...etc |
| 8 | Suitable bottle diameter | Ф60-Ф98mm |
| 9 | Suitable working temperature | -10℃~40℃ |
Our service:
| No | Details |
| 1 | The warranty period of the equipment is one year (excluding
man-made damage) |
| 2 | Installation and debugging services: professional service engineers
with many years of relevant experience shall be responsible for the
installation and debugging of the equipment until it is qualified
for acceptance and the equipment enters the production state. |
| 3 | In order to cooperate with the production plant, at any time
(including holidays), your equipment has an emergency, you can
immediately contact our service engineers, in order to deal with
the emergency at that time, so that your company due to the
shutdown of the loss to minimize. |
| 4 | Adequate parts inventory. In order to reduce the cost of customer's
parts inventory and provide better and faster service, our company
always has sufficient equipment parts as inventory, so at any time
your factory in the repair or maintenance of the parts required,
can be quickly provided. |
Thanks!
For more information please contact us!
