Description of onion dehydrator machine:
The onion dehydrator machine is with low noise, high temperature
axial fan and automatic temperature control system, the entire
circulatory system closed,so that the thermal efficiency of the
oven 60% higher than conventional drying, most of the hot air
circled in the drying chamber, high thermal efficiency, energy
conservation. The use of forced ventilation, the box is equipped
with adjustable sub-wind board, dry material evenly.
Principle of onion dehydrator machine:
This drying machine use of heat pump evaporator absorbs heat from
the outside air.or recycling of exhaust gas residual heat in the
process of drying.Through the work of compressor, the energy
transport (transfer) to drying box, drying box of hot air after
repeated cyclic heating, absorb the moisture in the material, its
cooling humidification, through hot air platoon is wet or the
process of condensation, water take the moisture out of the
material, and finally realizes the continuous drying of materials.
Application of onion dehydrator machine:
The heat pump can be used in many application,like
agriculture,industry,seafood,grain,herbs,construction,paper
products,seasoning,mineral industry,etc
Dry vegetables like Radish, lettuce, pumpkin, carrots, spinach,
cassava,etc
Dry fruits like Apple, lemon, mango slices, dried longan, dried
longan,etc
Dry meat: Sausage, beef, duck, ham,etc
Others it can dry noodle/ wooden /stick incense/herbs /floers ect.
Details
| Heat Pump Model | 3P | 6P | 15P |
| Air Supply Direction | Side | Back | Back |
| Host Power | 2.4KW | 6.4KW | 12KW |
| Auxiliary Heating Power | 3KW | 12KW | 24KW |
| Dimension(L*W*H) | 3.3*2*2.2m | 5.6*2.2*2.7m | 8*3*2.7m |
| Fan Group | 0.25kw*8 units | 0.25kw*16 units | 0.75kw*16 units |
| Number Of Trolley | 4 | 6 | 15 |
| Number Of Tray | 0.43*0.73mm * 96 units | 0.6*0.8mm *144 units | 0.8*0.8m *360 units |
| Capacity | 250-450kg | 600-1000kg | 1500-2000kg |
Packaging & Shipping
Packing:
Inside: plastic bag for the machine.
Outside: wooden case (adopt the wooden case or wooden pellets
depended on clients' requirement).
Transportation:
Shipping, train, express, or upon clients’ demands.
Our service and customers
Before sale services:
1. Provide the free consultation of the equipment
2. Provide the standard device and the flow chart
3. According to the client’s special requirement, offering the
reasonable plan and free design helping to select the equipment.
During sale services:
As your special requirements,we will arrange our professional
engineers to negotiate with you ,when you visit our factory, our
translators and engineers will accompany,you ca n consult them if
any question.
After sale services:
1. Oversea install and debug the equipment.
2. Train the first-line operator.
3. Operation/ Service/ Maintenance Manual: Provided In English.
4. We will provide 1-2 engineer to the client's factory for the
installation and teach your workers.
We exported the machines to many countries all around the world,
such as Italy, German, Russia, Tukey, Australia etc.Allmost all the
customers speak highly of our machines and service, and they
continue to buy from us again and again.
7. FAQ
Q: How long is your delivery time?
A: Generally speaking, it is 7 days if the machines are in stock.
Or it is 25 days if the goods are out of stock.
Q: Could you supply all the parameters about the machines?
A: Of course. We are delighted to supply all the information that
you want to know.
Q: How about the after sale service?
A: We will send our engineers to your factory for installation and
training.
