31.5 Mpa Nominal Pressure , Scrap Metal Shear HC42 - 2500 Shear
Steel Plate / Rebar
Introduction
HC42 series square sheet shear machine adopts hydraulic
transmission, compared with the mechanical drive type shears, has
small volume, light weight, small inertia, low noise, stable
movement, convenient operation, flexible, large shear section,
scissors, not soft not hard mouth, when shear is not short of
blasting, long service life, no gap again thin all good shear,
convenient adjustment and operation safety. This machine has
manual, automatic, convenient operation, simple control, scissors
mouth work in any position in the process of starting cut and stop,
and can according to the size of the cut materials, arbitrary
control cut the size of the mouth, in order to obtain the best
working efficiency.
The steel sheet slitter is mainly applied to the cutting of metal
plate materials such as steel plate, nickel plate and copper plate. The shear force ranges from 100 tons to 250 tons. The
main size of cut material is (12~20mm)*250mm. the shearing times is
8~12 per minute. This series require the simple infrastructure
construction.Scrap metal shear is researched and developed by
Shuanghe Machinery Manufacturing Co.,Ltd combined market’s demand.
Its production line mainly process various steel. (such as channel
steel,pipe,aluminum and other heavy scrap steel). The materials
after sheared have many advantages, to improve the quality of
smelting, to reduce the smelting cost, decrease the cost of
material transportation.
Technical Specificarions | Remark | Shear cylinder
| model | YG320/180-200 | Quantity | 1 |
| Nominal Force | 2500KN
| Stroke
| 200mm | press cylinder | model | YG80/50-150 | Quantity | 2 | Twin Parallel | Nominal Force | 125*2KN | Stroke
| 150mm | motor | model | Y225M-6 | Power | 30kw |
| Nominal speed
| 970 R/MiN | Quantity | 1 set | oil pump | Model | 160YCY14-1B | Nominal Pressure | 31.5 mpa |
| Nominal outputt
| 160 ml / r | Quantity | 1 set |
|
