| No. | Model | Power(KW) | Lifting Capacity ( scrap steel volume≥1.2T/M3) | machine weight(KG) |
| 1 | MW5-70L/1 | 3.2 | 100-120 | 500 |
| 2 | MW5-90L/1 | 5.6 | 200-250 | 7800 |
| 3 | MW5-110L/1 | 7.0 | 400-450 | 1250 |
| 4 | MW5-130L/1 | 11.9 | 600-700 | 2050 |
| 5 | MW5-150L/1 | 15.6 | 900-1100 | 2700 |
| 6 | MW5-165L/1 | 19.8 | 1100-1350 | 3400 |
| 7 | MW5-180L/1 | 22.4 | 1350-1600 | 4100 |
| 8 | MW5-185L/1 | 24.7 | 1500-1800 | 4500 |
| 9 | MW5-210L/1 | 27.3 | 1600-2200 | 6800 |
| 10 | MW5-240L/1 | 32.6 | 2200-2850 | 9000 |
- MW electromagnet is widely used in smelt, casting and
transportation department. It is a tool for conducting magnetic
objects for carrying steel plate, steel casting , steel ingot,
ingot, scrap iron and steel.
2. Electromagnet are ensure of reliable work under the following
conditions:
a,Not more than 2500 meters above sea level
b,Ambient air temperature is not more than 40 degrees Celsius,
the minimum temperature is not less than -20
c,Non explosive hazardous and non corrosive gases in the
environment
d,Both indoor and outdoor use
e,Ambient air humidity is not more than 90% (average temperature is
25 degrees Celsius)
Magnetic circuit is made of shell, iron core, out magnetic pole,
inner magnetic pole and absorbed.
The magnetic circuit parts are made of high quality steel and cast
steel with low carbon content.
Double glass fiber enameled aluminum or aluminum oxide film
insulation with winding coil .
Insulation material with H grade heat resistance grade .
Its use of high wear resistance of high manganese steel.
