Heavy Duty Electric Driven 10 tons Capacity Span 6m Lifitng Height
5m Single Girder Gantry Crane
Product application:
Single girder gantry crane with hook is applied outside warehouse
or railway sideways to do common
lifting and unloading works.
This kind of crane is composed of bridge, supporting legs, crane
travelling organ, trolley with strong
lifting winch, electric equipment and control system.
As its heavy duty design, it can be widely used in all kinds of
industrial field. As its heavy duty design,
it can be widely used in all kinds of industrial field.
Gantry Crane:
Electric parts are packed by high quality plywood crate to reduce
distortion in conveying;
2. Main beams, end beams and open winch are packed by plastic woven
cloth. It can reduce abrasion when transport.
3. If the size of whole crane are suitable for container ship,
usually by container; If the size is too big, usually by bulk ship
or by container after truncation.
Features:
1) high reliability, safety, free maintenance rate;
a) work duty: FEM2M, M5
b) Protection class: IP55
c) Insulation class: F
d) continuing rate: 60% ( for the high class motor)
e) Cooling rate: 30% than normal crane
f) Over temperature protection: 170℃
2) compact design, small size, low dead weight, low headroom
3) Low noise
4) Investment-saved---the workshop’s civil work cost, due to
crane’s light dead weight and low wheel pressure.
5) Power-saved. The total motor power is much lower than normal
design.
Single Girder Gantry Crane
* Lifting capacity is 5 to 20 ton.
* Span is 12 to 30 meters
* Lifting height is 6 to 12m
* Appication: used at open or room ground and warehouses, yards
etc.
Single Girder Truss Gantry Crane
* Lifting capacity is 5 to 20 ton.
* Span is 12 to 30 meters
* Lifting height is 6 to 12m
* Application: The best light crane, used both in multi-wind area
and workshop for inside and outside.
Semi Gantry Crane
* Lifting capacity: 2 to 10 tons
* Span: 10~20m
* Lifting height is 6 to 12m
* Application: it could be used in outdoor or indoor warehouse for
loading and unloading
(Single Girder) L type Gantry Crane
* Loading capacity is from 5 to 32t
* Span is from 12 to 30m
* Application: used in outdoor warehouse for loading and unloading
Loading capacity | 1~50T |
Lifting height | 3-30M or customized according to your demands |
Span | 6~35M |
Work duty | A5~A7 |
Power supply | 220~440V,50/60HZ,Single or three phase |
Working temperature | -20-40 ℃ |
Safety device | Emergency stop system, Overload protect, Anti-collision buffer,
Limit switch, etc. |
Product advantage:
1. Credible electric parts to guarantee the crane safety in
operating.
2. Effective and optimization design minimize the self-weight and
ensures safety, stability and intensity.
3. Low gravity, small wheel pressure, space saving and lifting
weight upto 50t.
4. High strength, good rigidity, light weight and excellent
material ensure stability and convenient operation.
5. Flexible driving, extensive adaption, excellent frequency
conversion control, stable operation, low maintenance and easy
replacement.
Environment:
1. Normal use in range of -25℃~40℃, average temperature mustn't
exceed 35℃ inside 24 hours.
2. Other installation site altitude shall not exceed 2,000 meters
and should check motor capacity when above 1000m.
3. Flammable,explosive and corrosive gas are forbidden in the work
environment.
4. The crane is forbidden to lift fuse and blend deleterious
article and flammable explosive article
Safety feature:
Automatic rectify deviation control
Weight overload protection device
Top quality polyurethane buffer
Phase protection
Lifting limit switch
Cross traveling limit switch
Long traveling limit switch
Voltage lower protection function
Emergency stop system
Current overload protection system
Lighting system
Light and alarm system
NOTICE:
As this kind of crane is customized, in order to offer you most
suitable design and best solution, please confirm following
information when you send inquiry.
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us supply the rails?
How long is it?
5. Power supply: Voltage.
6. Working condition: which material to lift? temprature?
Packaging Details
Port Container Gantry Cranes packaging standard:
1. Electric parts are packed by high quality plywood crate, to
reduce distortion in conveying.
2. Main beams, end beams and trolly/winch are packed by plastic
woven cloth. It can reduce abrasion during the transportation.
3. If the size are suitable for container ship, usually by
container.
4. Big size, usually by bulk ship or by container after truncation.
5. Transport ways are based on reducing cost & keep safety.
Gantry Crane After-sale Service
1.1 year standard warranty (could be prolonged by discussion).
2. 24 hours response.
3. Free mail and telephone service guidance.
4. Necessary door to door service to solve the problem.
5. In warranty period, if our machine has problem and the problem
can’t be solved by door to door service for 3 times, we will send
you a new machine replace the former one freely.
6. one or two sets free quick-wear parts.
FAQ
1. Is your products customized?
Yes, because the working condition are different, all our products
are customized depending on detail requirement! So if you give us
more information about the lift capacity, span, lift height, power
source and other specials, we will give you a very quick quote!
2. What’s the information should I provide when inquiry?
Thanks for your question. The more information you provide, the
accurate solution we can prepare for you! The information such as
the lift capacity, span, lift height, power source or other
specials you give us will be more appreciated.
3. How many operating methods for my selection?
Thanks for your question. The standard operating methods we provide
is pendent controller with push buttons. Meanwhile, we can also
provide the remote control with push buttons and the cabin (space
capsule seat) control with joystick. You can choose any of them,
just tell us!
