| Name: Welding Type Cryogenic Shut-off Valve for LNG Storage Tank Valve |
| Main technical parameters: | Nominal diameter: DN10-100mm |
| Nominal Pressure: PN4.0MPa |
| Applicable medium: LO2, LN2, LAr, LNG |
| Applicable temperature: -196℃~+80℃ |
| Connecting format:SW |
| Material: | Body: CF8 |
| Bonnet: 06Cr19NI10 |
| Stem: 06Cr19NI10 |
| Packing: PTFE |
Disc face ring:PCTFE |
Notes When Use
1 . It should ensure that the pipe is blown clean before
installation.
2 . When installing, make sure that the flow direction indicated by
the arrow on the valve body should be consistent with the flow
direction of the fluid.
3 . This valve has been degreased. Store and keep clean when
installing.
4 . After the pipeline construction is completed, all the valves on
the pipeline should be opened, and the residue in the pipeline
should be thoroughly and thoroughly kept to ensure that the
pipeline system is clean and free of debris.
5 . The installation system diagram with the oil-free requirements
should be degreased.
6 . Slowly open and close during use.
7 . If the precision parts such as the valve disc, valve seat and
valve stem are worn or damaged, it must be repaired and replaced in
time.
8 . For parts such as gaskets and sealing materials, replace them
with new ones each time.
Handwheel Stainless Steel High Pressure Cryogenic Emergency Shut
Off Valve
