Self Drilling Anchor Coupling Sleeve R51 180mm length for
Tunnelling Ground engineering
The Self Drilling Anchor (SDA) system is a bolting solution for difficult ground and rock
conditions. The system enables drilling and grouting in one
operation, making much saving in jobsite and project time. Which is
comprised of a hollow threaded anchor bar with a sacrificial drill
bit that performs drilling, anchoring and grouting in a single
operation. Self drilling anchor system is mainly used in slope
stabilization, tunneling pre-support, foundations with micro piles
etc jobs, which is widely used in mining, tunneling, railway, metro
construction etc projects.
Advantages
1, easy and similar operation principle for different rock mass and
soil conditions.
2, drilling, anchoring and grouting can be performed in one single
operation.
3, no pre-drilling of a borehole by using a casing tube and
extension rods with subsequent anchor installationnecessary.
4, minor space requirement for the accomplishment of anchoring.
5, optimized machinery and manpower requirements.
6, basic dimensioning of the required anchoring forces by choosing
the appropriate anchor type.
7, optimum bonding of the profiled anchor rod and the grout.
8, adjustment of the drill bit design and diameter to different
rock mass and ground conditions.
9, simple anti-corrosion method available.
10, appropriate for temporary or permanent applications
Specification
Anchor Coupling
| Model | R51L/36 | R51L/34 | R51N/33 | R51N/31 | R51/760 | R51/540 |
| Outside Diameter (mm) | 63 |
| Length (mm) | 140 | 200 | 260 | 180 |
| Hardness (HRC) | 20-30 |
| Thread Type | R51 |
| Raw Material | 40Cr |
| Unit Weight (kg) | 1.26 | 1.9 | 2.46 | 1.68 |
| Thread | R51 |
Application
Tunnelling Ground engineering
1. Face stabilization
2. Radial systematic anchoring
3. Foundation for avalanche protect
4. Stabilization of tunnel portals
5. Spilling
6. Root piling
Other Similar Product -T76 Coupler
| Anchor Coupling | T76N | T76S |
| Outside Diameter (mm) | 95 | 95 |
| Length (mm) | 200 | 220 |
| Hardness (HRC) | 23-30 |
| In a certain range, tensile strength increases in proportion to
hardness. For couplers or nuts, it's important to make sure the
fitting capacity with bars must reach bar's capacity itself.
Through hundreds of rounds of testing, SupAnchor sets up a lab
standard which is HRC 23 – 30 for couplers and HRC 25 – 30 for
nuts. SupAnchor's products have achieved 100% safe application over
15 years. |
| Thread type | T International Standard |
| Type of steel | EN10083-1 |
| Unit Weight (kg) | 4.3 | 5.35 |
| Thread (Left /right hand) | Left or Right |
Company Information:
The MIROC® Rock Drilling Tools product line by KSQ Technologies (Beijing) Co.Ltd. is the result of years of advanced engineering, precision
manufacturing, and dedication to the use of high-quality materials.
MIROC® Rock Drilling Tools are used by many drilling professionals
related to mining, construction, tunneling, and quarrying projects
around the globe.
MIROC® Rock Drilling and Ground Support Tools include:
Integral Rods
Plug Hole Rods
Tapered Drilling Tools
Extension Drilling Tools
Drifting and Tunneling Tools
Reaming Tools
Shank Rods
Shank Adapters (Striking Bars)
Down-the-hole (DTH) Bits
Down-the-hole (DTH) Hammers
PDC Bits
Tricone Bits
