NJP-400 Electric Automatic Gelatin Capsule Making Machine
The machine is an intermittent motion and hole plate type filling
fully automatic capsule filling equipment. It adopt optimization
design combined the characteristics of Chinese medicine and the
requirement of GMP, it has the characteristics of compact
mechanism, small volume, lower noise, precision filling dosage,
multi-function, running stably etc. It can finish the following
motion at same time: capsule feeding, capsule separating, powder
filling, capsule rejecting, capsule locking, finished capsule
discharge and module cleaning etc. This machine is designed for
meet the volume-produce on the basis of model NJP automatic capsule
filling machine. it increase the lifting mechanism that easy to
clean. It saves the cost and manpower for the enterprise that need
volume-produce.
The equipment has small volume, low power consumption, easy to
operate and clean.
Products standardized, components can be interchanged, replacement
of molds are convenient and accurate.
It adopt cam downside design, to increase pressure in atomizing
pumps, keep cam slot well lubricated, reduce wearing, thus prolong
the working life of the parts.
It adopt high precision graduator, little vibration, noise below
80db and use vacuum-positioning mechanism to ensure the capsule
filling percentage up to 99.9%.
It adopt a plane in a dose-based, 3D regulation, uniform space
effectively guaranteed load difference, rinsing very convenient.
It has man-machine interface, complete functions. Can eliminate
faults such as materials shortage, capsule shortage and other
faults, automatic alarm and shutdown, real-time calculation and
accumulation measurement, and high accuracy in statistics.
It Can be completed simultaneously broadcast capsule, branch bag,
filling, rejecting, locking,the finished product discharging,
module cleaning function
Main Technical Data:
| Model | 400C |
| Capacity | 400capsules/minute |
| Machine suitable for | capsule Size #00 to 5 |
| Power supply | 415v 50Hz three phase (it can be changed depend on your
requirement) |
| Power consume | 3.2kw |
| Quantity of mould bores | 3pcs |
| Noise standard | ﹤75dB(A) |
| Weight | 900kgs |
| Overall dimension | 660*800*1750mm |
