Automatic Induction Pipe Bending Elbow Machine For Construction
The Automatic Induction Pipe Bending Elbow Machine For Construction can produce the elbows in varieties:
outer size: 25mm ~ 1420mm;
thickness: 5mm ~ 120mm; angle: 45 , 60 , 90 , 180 and the angle
required by user.
Gost Standard Elbow Mandrel Forming Machine material:
carbon seamless steel,20 G, A106B, A106Welded pipe:235 B,345 B,
X42, X52, X60, X70.
| Elbow size | outer diameter Φ25mm(1″)~Φ1420mm(56″) |
| Wall thickness | 5~120mm |
| Bent diameter | ≤3 |
| Bent degree | 22.5°,45°,90°,135° etc. |
| Hydraulic cylinder | 2/4sets |
Machine composition
| 1. machine base/frame |
| 2. Main cylinder and supporting plate |
| 3. pushing plate |
| 4. front supporting plate |
| 5. loading table |
| 6. induction coils and adjusting device |
| 7. medium frequency power supply |
| 8. electrical control system |
| 9. auxiliary equipment: hydraulic machine/ stamping moulds/pipe end
cutting machine/quality testing machine |
Automatic Induction Pipe Bending Elbow Machine For Construction Using the unique voltage stabilized technology, the output power
can still be constant, even the input voltage fluctuated by 10%.The
power supply have the advantage of energy saving ,environment
friendly, small noise.
The induction coil can be adjusted by motor for movement of up and
down, front and back ,rotary. Easy and safe to operate by handle
control.
By adopting PLC control system, the elbow producing can be running
automatically. One worker only need putting the material pipe to
the feeding device which improved the producing speed , reduced the
labor intensity
Induction Forming Bending Machine , SR LR Elbow Hot Forming ,Pipe
Bending is a forming machine tool. Its function is to assemble a
bend on a steel pipe. A bends is manufactured by using a bending
tool during a linear or turning move. The in-depth category can be
performed with the aid of the kinematics.
