Digital pressure indicator and controller with RS485 Good quality
N60/N50/N10 digital indicator is the new developed product of our
company. It has much advanced technology in the world ,such as the
technology in electron, singlechip, computer erasure, anti-jamming
and so on. To make the indicator have the strong point of high
precision of measure and control,as well as the well fuction of
anti-jamming.
The whole machine has three cases of 96*96*100(N60)/ 96*48*100(N50)
48*96*100 (N10). So it is small in volume, light in height and save
power and completed function and reliable task. Flexible and easy
to use. It can be widely used not only in situation of display and
autocontrol in hydraulic pressure, oil, plastics, latex, printing
and dyeing, textile industry but also can be compound with
resistance strain guage press sensor of other manufactory. If it is
used with our model PT124- series melt pressure transducers and
normal pressure transducer.
As high precision pressure of measure and control, it can be set
upper limit and lower limit alarm.It has the indicator light on
alarm,relay touch output control peripheral equipment, high
precision of voltage output module, current output module and relay
output control modult for user to choose.The machine adopts the
operation of humanism,so it is easy for operating.
Specification
(1) display double four digits high brightness green and ren
radiation numeral pipe
(2) display exculpation rate 0001
(3) the range of display 0001-9999Mpa (radix point alterable)
(4) the precision of metre 0.2%FS+-1bit
(5) the display of indicator light adjust indicator light,OUT
output indicator light,AL1,AL2 alarm indicator light
(6) output signal statoscopo 2mV/V ;3.3mV/V (Optional)
(7) sampling speed 20 times/second
(8) sensor opeiating voltage 9V high precision DC
(9) output control the pressure or electric current output with
full singal rult
(10) main alarm output upper limit alarm has relay output (220V 1A)
upper limit alarm display (out)
(11) assistant output assistant output can be compound with
different function module and set by the meter to meet the
difference output need.The content in detail please read 1(3)the
explain of module function.Assistant output can be choosed
from.(order for explain)
(12) the range of alarm 0001-9999Mpa (radix point alterable )
(13) Calibration display display 80% of full ranges (the sensor
should be no load) CAE light
(14) the temperature and humidity of work 0-55’C, ≥80%RH
(15) power demand 85-265VAC 50Hz-60Hz
(16) exterior size N60: 96mm x 96mm x 100 mm (W x H x D) ;
N50: 96mm×48mm×100 mm (W x H x D)
N10: 48mm×96mm×100 mm (W x H x D)
(17) placket size N60: 96mm x 96mm x 100 mm (W x H x D)
N50: 96mm×48mm×100 mm (W x H x D)
N10: 48mm×96mm×100 mm (W x H x D)
(18) itsele height approximately 400g/200g/200g
