Automatic Ultrafiltration Membrane System UF Water Treatment
1000LPH
Ultrafiltration Membrane System Description
Ultrafiltration membrane is the anisomerous semipermeable membrane made of macro molecule
material as theseparationmethod without phase transition for
solution, and can remove particles whose molecule weight ranges
1,500-100,000 Dalton,and can effectively remove
organic,bacterium,virus,colloid and non-ion suspended solid.
Ultrafiltration is a separation technique widely used.Mainly the use of
polysulfone, microporous polyethersulfone
ultrafiltration membranes (molecular weight cut thousands of ten
thousands daltons) filter out impurities in the water
can be removed more than 98% organic matter, to ensure that the
treated water is less than 1 SDI, the SDI value, the
turbidity is very satisfactory.The pretreatment facilities are
exempt large, does not need the coagulant, flocculation, comply
with environmental requirements.
Ultrafiltration Membrane System Advantages and disadvantages
| ► Ultrafiltration membrane components use the world famous membrane
company products, to ensure that customers get the world's best
quality organic membrane components, to ensure the retention
performance and membrane flux, ultrafiltration equipment control
system can be personalized according to the user's specific
requirements. Combined with advanced control software, on-line
online centralized monitoring of important process operating
parameters, to avoid manual misoperation, multi-directional to
ensure long-term stable operation of the system. |
| ► Since each ultrafiltration unit is added with a protective liquid
before leaving the factory, thoroughly rinse the protective liquid
in the assembly before use. Rinse with low pressure (0.1 MPa) for 1
hour, then rinse with high pressure (0.2 MPa) for 1 hour. When the
low pressure or high pressure flushing, the system's production
water discharge valve should be fully open. When using water, check
and confirm that the product water does not contain any fungicide. |
| ► The ultrafiltration equipment system has a high recovery rate,
and the obtained product has excellent quality, and can realize
efficient separation, purification and high-concentration of
materials. The system is made of sanitary grade pipe valves, which
are clean and hygienic on site, meeting the requirements of GMP or
FDA production regulations. The system has advanced technology
design, high degree of integration, compact structure, small floor
space, easy operation and maintenance, and low labor intensity. |
| ► The process has no phase change, has no adverse effects on the
constituents of the material, and is always in a normal temperature
state during separation, purification and concentration, and is
particularly suitable for the treatment of heat sensitive
substances, completely avoiding the disadvantage of high
temperature on the destruction of biologically active substances.
Effectively retain bioactive substances and nutrients in the
original material system. |
| ► The ultrafiltration unit should be handled with care and
attention. Since the ultrafiltration unit is a precision equipment,
be careful when using it, and take it lightly and gently. If the
components are deactivated, rinse them with clean water, add 0.5%
formaldehyde solution for disinfection, and seal them. If the
winter components are still antifreeze, the components may be
scrapped. |
| ► The ultrafiltration equipment system has low energy consumption
and short production cycle. Compared with the traditional process
equipment, the equipment operation cost is low, which can
effectively reduce the production cost and improve the economic
benefits of the enterprise. |
| ► The advantages of ultrafiltration technology are simple
operation, low cost, no need to add any chemical reagents,
especially the ultra-filtration technology has mild experimental
conditions, no phase change compared with evaporation and
freeze-drying, and does not cause temperature and pH changes. Thus,
denaturation, inactivation and autolysis of biomacromolecules can
be prevented. In the preparation technology of biological
macromolecules, ultrafiltration is mainly used for desalting,
dehydration and concentration of biological macromolecules. The
ultrafiltration method also has certain limitations, and it cannot
directly obtain a dry powder preparation. For protein solutions,
generally only 10 to 50% concentration is obtained. |
Ultrafiltration Membrane System Details
Ultrafiltration Membrane System Application
1. Dairy, Fruit Juice, Vegetable Juice And Other Clear,
Concentrated.
2. Animals And Plants (Aloe Vera, Mangosteen, Tea, Etc.) Effective
Ingredients Extraction.
3. Soybean Protein, Oligosaccharides, Isoflavones And Other
Extraction, Concentration.
4. Antibiotics, Amino Acids, Vc And Other Fermentation Broth
Purification, Concentration.
5. Chinese Medicine (Bupleurum, Salvia, Scutellaria, Etc.)
Injection Of Active Ingredients Purification, Separation.
6. Polysaccharides (Ganoderma Lucidum, Grifola Frondosa, Mushrooms,
Etc.) Material Purification, Concentration.
7. Fluorescent Whitening Agent Desalination, Concentration.
8. Electrophore Paint Recovery And Water Reuse.
9. Pva Of Textile Desizing Wastewater Reuse.
Ultrafiltration Membrane System Optional Components
Ozone Generator
Regulating wheels
Dosing system
Automatic cleaning system
PE,stainless steel or FRP water tank
Thank you so much for your value time.Any questions please click
"contact now" send us inquiry !We will reply you within 24 hours.
