Feeding Minerals Vibrating Screen Feeder Equipment Heavy Duty
Continuous
Introduction of Heavy Duty Continuous Vibrating Feeder Equipment for Feeding
Minerals:
Heavy Duty Continuous Vibrating Feeder Equipment for Feeding
Minerals adopt the self-synchronization principle of two eccentric
vibration motor, and form a horizontal 60 ° angle of the resultant
force, through periodic vibration, thus promoting the throw or
gliding to the materials within the trough reached the granular,
small block and powdered materials from storage silos to the
subject material equipment in uniform, quantitative, continuously.
The vibrating feeder has the advantages of simple structure,
convenient operation, no need of lubrication and small power
consumption, and it can evenly adjust the ore feeding amount.
Therefore, it has been widely applied. It is generally used for
loose materials. According to the equipment performance
requirements, the design shall be configured to minimize the
pressure of the material on the trough body. According to the
manufacturer's requirements, the effective discharge opening of the
silo shall not be greater than a quarter of the width of the
groove, and the flow speed of the material shall be controlled at
6-18 m/min. For materials with a large feeding amount, a ore
blocking plate at a sufficient height should be set at the bottom
of the silo. In order not to affect the performance of the feeder,
the blocking plate shall not be fixed on the trough body. In order
to enable the bin to be discharged smoothly, the inclination angle
of the rear wall of the silo is preferably designed to be 55~65
degrees.
Features of Heavy Duty Continuous Vibrating Feeder Equipment for
Feeding Minerals:
1. Characterized by even feeding, excellent continuity and
adjustable vibrating force.
2. Smooth operation, great feeding capacity and high efficiency.
3. Overhead suspended spring suspension.
4. Two electromechanical motors are used to generate linear motion.
5. Best suited for the extraction of products in bulk from storage
bins, hoppers, feeding conveyors etc.
6. Closed structure body can be used to avoid dust pollution.
Purpose of Heavy Duty Continuous Vibrating Feeder Equipment for Feeding
Minerals:
The vibration feeder is widely used in metallurgy, coal mine,
beneficiation, building materials, chemical, abrasive and other
industries in the crushing and screening combined equipment.
Vibrating feeder is used in the production process to give block,
grain and powder materials evenly, continuously or quantitatively
from the storage warehouse or hopper to the receiving equipment. It
can adjust the feeding amount steplessly, and realize the
centralized control and automatic control of the production
process. It can feed to belt conveyors, bucket elevators, screening
equipment, crushers, pulverizers etc., as well as automatic
batching, quantitative packaging etc., and can use automatic
control processes to achieve automation of production processes.
Working Principle and Structural Characteristics of Heavy Duty Continuous Vibrating Feeder Equipment for Feeding
Minerals:
The ZG series vibrating feeder is driven by a new type of vibration
motor, which makes the sieve body perform periodic linear
reciprocating motion along the groove direction to achieve uniform
and quantitative feeding. ZG series vibration feeder is composed of
material body, vibration motor and vibration damping device.
Technical Parameters of Heavy Duty Continuous Vibrating Feeder Equipment for Feeding
Minerals:
| Model | Feed Material Size
(mm) | Capacity
(t/h) | Self Vibration Source Model | Vibration Motor Model | Power
(KW) | Vibrating Frequency
(Hz) | Double Amplitude
(mm) | Exciting Force
(KN) | Ref. Weight
(Kg) | Single-point Dynamic Load (Kg) |
| ZG-35-90 | 0-60 | 25 | WLZD-2*2.5-4 | YZO-2.5-4 | 0.25*2 | 25 | 2-4 | 2.5*2 | 174 | 30 |
| ZG-45-90 | 0-60 | 30 | WLZD-2*5-4 | YZO-5-4 | 0.4*2 | 25 | 2-4 | 5*2 | 184 | 30 |
| ZG-45-90 | 0-100 | 50 | WLZD-2*5-4 | YZO-5-4 | 0.4*2 | 25 | 2-4 | 5*2 | 235 | 38 |
| ZG-70-100 | 0-150 | 100 | WLZD-2*8-4 | YZO-8-4 | 0.75*2 | 25 | 2-4 | 8*2 | 342 | 50 |
| ZG-80-120 | 0-150 | 200 | WLZD-2*17-4 | YZO-17-4 | 0.75*2 | 25 | 2-4 | 17*2 | 372 | 60 |
| ZG-90-150 | 0-150 | 300 | | YZO-20-4 | 2.0*2 | 25 | 4-6 | 20*2 | 606 | 80 |
| ZG-95-150 | 0-150 | 400 | | YZO-20-4 | 2.0*2 | 25 | 4-6 | 20*2 | 646 | 85 |
| ZG-140-180 | 0-150 | 750 | | YZO-30-4 | 2.5*2 | 25 | 4-6 | 30*2 | 1030 | 180 |
| ZG-160-180 | 0-150 | 1000 | | YZO-50-4 | 3.7*2 | 25 | 4-6 | 50*2 | 1156 | 200 |
Installation, Commissioning, Use and Maintenance of Heavy Duty Continuous Vibrating Feeder Equipment for Feeding
Minerals:
1. When using a vibrating feeder for batching and dosing, in order
to ensure uniform and stable feeding and prevent material from
flowing, it should be installed horizontally. For continuous
feeding of general materials, it can be installed down 10°. For
viscous materials and materials with large water content, it can be
installed down 15°.
2. Can be tilted down 15° for installation.
3. After installation, the feeder should have a 20mm running
clearance, the horizontal should be horizontal, and the suspension
device should be flexible connected.
4. Before empty commissioning, all bolts should be tightened once,
especially the anchor bolts of the vibration motor, which should be
re-tightened once for 3~5 hours of continuous operation.
5. When commissioning, the two vibration motors must rotate in
opposite directions.
6. During the operation of the feeder, the stability of the
amplitude, current and noise should be checked frequently. Stop it
in time if any abnormality is found.
7. Lubricate the motor bearings every 2 months, and lubricate once
a month during high temperature seasons.
Contact: Ms. Magie
E-mail: sale@aarealmachine.com
magiecn@gmail.com
WhatsApp/WeChat: 0086-15637361027
Website: https://www.aarealmachine.com
