Goyen Type 1'' Outlet 1-1/2'' Inlet Flanged Valve for Reverse Pulse
Jet Systems In Dust Collectors
CA/RCA-FS Series right angle with inlet port flange connection
solenoid pulse jet valve, Outlet connect with blow tube
directly.Outlet at 90° to inlet.
The inlet diameter of the FS valve is larger than the outlet, and a
venturi injection structure is formed in the valve body, so it has
the characteristics of low resistance, fast response and high Cv
value.
Specification of CA25FS Solenoid Pulse Valve:
| Model No. | CA25FS |
| Port Size | 1'' outlet 1-1/2'' inlet |
| Valve Type | Diphragm Valve |
| Action Type | Pilot Operated |
| Connection Type | Flanged Inlet Port |
| Temperature Range | -5~+55℃ |
| Pressure | 0.3~0.8Mpa |
| Body Material | Diacast Aluminum |
| Seal Material | NBR(common, all available) |
| Voltage | AC24V, AC110V, AC220V, DC24V |
Overall Dimension of CA25FS Dust Collector Valve:
Deatails of CA25FS Diaphragm Electromagentic Pulse Valve:
Connecting surface of CA25FS Solenoid Pulse Valve:
Benefits of Goten Type Flanged Valve :
-For noxious substance control and environmental dust management
Cost savings
-Increased pulse efficiency, reduced energy consumption
-Durable materials and wide temperature range enhance lifespan
-Longer filter life, lower dust collector OPEX
Compliance
-With environmental and health & safety regulations
Ease of installation
-No welding required with 90° connections directly onto square
tanks
-Camlock adapter available for attachment to round tanks
How do pulse clean system work?
A reverse pulse (often called a pulse jet or reverse jet) filter
cleaning system is a simple action that has significant results.
A simple explanation of a reverse pulse filter cleaning system is
as follows:
in normal dust collector operation, air flows from the outside of
the filter media to the center of the filter.
The dust is filtered out and left on the outside surface of the
filter.
To clean off this dust, a blast of compressed air is shot down the
center of the filter and works outward taking the dust off of the
surface of the filter.
In a downflow dust collector, the dust is captured by that downward
airflow and eventually deposited in the collection bin.
Maintenance:
Before conducting any maintenance activity on the system ensure
that components are fully isolated from pressure and power
supplies. Pressure and power should not be reapplied until the
valve has been fully assembled.
Diaphragm and pilot inspection should be conducted annually.
| Nirtrile | FKM | Low Temp –60°C (–76°F) MIN. | Includes |
| k2501 | k2503 | k2504 | Diaphragm kits include main and secondary diaphragms (where
required) and all springs. |
| K0380 | K0384 | | O-ring armature assembly, armature spring, ferrule |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
