Standard Diameter Solid Carbide Round Blanks For Various Industry
Cutter Machining
Product specification
Specification: Diameter:6 mm x100mm
Surface Condition: polished
Chemical Composition: WC :88.5% + Co: 10% + Others: 1.5%
Density: 14.2~14.6 g/cm3
Hardness: HRA92.5.
T.R.S.: 3800N/mm2
Recommended Grade: YG6, YG8, YG6X, YG012, YG013, YG8A etc.
Surface: stock in blank, center less blank and polished form.
Feature: Easy operation, long lifetime.
Various grade for your choice
| Grade | YL10.2 | YG6 | YG6X | YG10X | YG8 | YG15 |
| ISO Range | K25-K35 | K20 | K10 | K35 | K30 | K40-K50 |
| WC+others % | 90 | 94 | 94 | 90 | 92 | 85 |
| Co % | 10 | 6 | 6 | 10 | 8 | 15 |
| Grain Size μm | 0.6 | 0.8 | 0.6 | 0.6 | 0.8 | 0.8 |
| Density g/cm3 | 14.5 | 14.9 | 14.9 | 14.5 | 14.6 | 14.1 |
| Hardness HRA | 92.5-92.8 | 89.5 | 92 | 90 | 89 | 86.5 |
| T.R.S N/mm2 | 3800-4000 | 2150 | 2000 | 2200 | 2200 | 2400 |
| Grade | Application |
| YL10.2 | ultra-fine grain WC+ 10% Coblat, with good Wear resistance and
Toughness, strength comparatively higher,suitable for PCB micro
drills,for making drills,end mill,reamer,taps,burrs etc. |
| YG6 | Fine Grain WC+6% Cobalt, with Good Wear resistance, used for hard
wood,processing original wood,aluminum section bar,brass rod and
cast iron. |
| YG6X | ultra-fine grain size with cobalt 6%,with good wear
resistance,Suitable for processing Chilled cast iron,
heat-resistant alloy steel, and fine process of common cast iron |
| YG10X | ultra-fine grain WC+ 10% Cobalt, suitable for small diameter Micro
drill ,vertical milling cutter, rotating file |
| YG8 | fine GrainWC+ 8% Cobalt Suitable for the roughening of cast iron
and light alloys and also for the milling of cast iron and
low-alloy steel. |
| YG15 | fine grain WC +15% Cobalt for mining tools, cold heading and
punching dies |
We can supply all kinds of dimensions solid carbide rods with
fine&sub micron grain size. We specialized in tungsten carbide
round bars with outstanding production line of solid carbide rod
and coolant rod.We manufactured and stocked unground and ground
carbide rods for you.
Our Various Size List
| Grinding | Blank |
| D | L | D | L |
| (mm) | Tol.(mm) | Tol.(+1mm) | (mm) | Tol.(mm) | Tol.(+3mm) |
| 0.7 | h6 | 330 | 1 | +0.2 | 330 |
| 2 | h6 | 330 | 2.2 | +0.2 | 330 |
| 3 | h6 | 330 | 2.7 | +0.2 | 330 |
| 3.175 | h6 | 330 | 3.2 | +0.2 | 330 |
| 4 | h6 | 330 | 3.7 | +0.2 | 330 |
| 5 | h6 | 330 | 4.2 | +0.2 | 330 |
| 6.35 | h6 | 330 | 4.7 | +0.2 | 330 |
| 7 | h6 | 330 | 5.2 | +0.2 | 330 |
| 8 | h6 | 330 | 5.7 | +0.2 | 330 |
| 9 | h6 | 330 | 6.2 | +0.2 | 330 |
| 10 | h6 | 330 | 6.7 | +0.2 | 330 |
| 11 | h6 | 330 | 7.2 | +0.2 | 330 |
| 12 | h6 | 330 | 7.7 | +0.3 | 330 |
| 12.7 | h6 | 330 | 8.2 | +0.3 | 330 |
| 13 | h6 | 330 | 8.7 | +0.3 | 330 |
| 14 | h6 | 330 | 9.2 | +0.3 | 330 |
| 15 | h6 | 330 | 9.7 | +0.3 | 330 |
| 16 | h6 | 330 | 10.2 | +0.3 | 330 |
| 17 | h6 | 330 | 10.7 | +0.3 | 330 |
| 18 | h6 | 330 | 11.2 | +0.3 | 330 |
| 19 | h6 | 330 | 11.7 | +0.3 | 330 |
| 20 | h6 | 330 | 12.2 | +0.3 | 330 |
| 25 | h6 | 330 | 14.3 | +0.3 | 330 |
| 24 | h6 | 330 | 15.2 | +0.3 | 330 |
| 30 | h6 | 330 | 16.2 | +0.3 | 330 |
| .......... | | | ........ | | |
For more size information, please kindly email or call us.For
length, we can cut to any size.
Production Advantages
1. we using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS
2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. With the HIP sintered technology,the structure of tungsten
carbide is more uniform,more dense,the TRS can be raised more than
20%
7. We make tungsten carbide rods extruded or pressed.
8. Customization is acceped
Production Process:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Application:
Tungsten carbide rod grades are mostly fine and ultra fine grain
with high performance. It's suitable for processing of non-ferrous
metal, plastic materials, carbon fiber, chilled cast iron and
heat-resistant alloy steel, high-temperature alloy steel, stainless
steel, high manganese steel, etc. It can manufacture of drill bits,
end mills, and reamers. Tungsten carbide bushing widely used in
stamping tools and wear-resistant tools, etc.
We guarantee:
* We are real factory in Zhuzhou
* Full ability to accept OEM & ODM orders
* Manufactured with100% tungsten carbide raw material
* Comply with ISO 9001:2015 Certification
* Strict inspection for quality of raw material and finished
products
* Rich experience of over 10 years
* Advanced technology , automatic pressing , HIP sintering
Our packing
Based on Detail products, we use different Standard packing
suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or
paper protection
For more information, warmly welcome to contact me
Shirley: shirley@chinahardalloy.com
