Automatic steel bar lattice truss welding production machine 12 m /
min
YBT Machinery is the direct manufacturer specialized in H-beam
Steel Automatic Production Line. After the studying and improving
for many years, YBT H-beam Production Line has the compacted
structure, advanced function and reliable quality. We have obtained
the good approval at home and abroad. We can also make the better
design and manufacturing of H-beam Production Line according to the
client's workshop and workpiece character.
Technical Parameters:
No.
| Item | Specification |
1
| Rated power | 3*250KW |
2
| Power source | 380V 50Hz |
3
| Phase number | 3phase 4cable |
4
| Duty cycle | 20% |
5
| Air pressure | 0.6-0.8MPa |
6
| Coolant flow | >150L/min |
7
| Coolant temperature | ≤30℃ |
8
| Dimension | 39.4m*4.4m*3.3m |
9
| Oil pressure | 7-11MPa |
| 10 | Height of gider | Straight foot 70-350mm folding foot 70-330mm |
11
| Section spacing | 190-210mm adjustable |
12
| Assist bar diameter | 4-8mm |
13
| Upper bar diameter | 6-14mm |
14
| Max.speed | 12 m/min adjustable with height |
15
| Lower bar diameter | 6-14mm |
The automatic steel truss welding production line (wave peak
190-210 adjustable) provides steel truss production line special
equipment, welding machine is mainly processing truss welding.
Product features:
1 . Wide production and use range of equipment: high and low range
value of truss
2 . Convenient production and adjustment: the main engine of the
steel truss welding line adopts an integral frame, which is
electrically adjusted up and down to meet the needs of steel truss
welding of different heights.
3 . The overall production line is compact in structure, small in
area and beautiful in appearance.
A. No power consumption in the straightening part, which is pulled
and straightened by the oil cylinder;B. In the whole machine work,
except three transformer welding and hydraulic station motor, other
parts do not consume electricity.
4 . The interval between wave peaks of steel trusses is adjustable
from 190-210mm, without the need for secondary manual shearing.
5 . general steel welding without oxidation degree treatment (can
adapt to cold rolling and hot rolling steel welding)
6 . Application scope of this equipment: steel truss floor bearing
plate, PC precast concrete component, railway sleeper and other
industries.
The components of the steel truss welding line:
1 . Feeding mechanism 2 . Straightening mechanism 3 . Main engine
(including welding part) 4 . Feeding device 5 . Hydraulic system 6
. Cooling system. The equipment has reasonable structure, easy to
control and beautiful appearance.
Finished products are as follow:
Service Commitment & Quality Assurance:
Installation: If necessary, engineer is available to service
machinery overseas; but all the relevant cost and extra 100USD/day
for our engineer will be paid by the buyer.
Warranty: 1 year since the machine leave seller's factory.
During the warranty period, it covers all spare parts of machines,
if you find some spare parts were damaged, those new spare parts
will be supplied free by us, but normal wear and tear excepted. And
the freight should be bore equally by both parties.
