DN110 Ceramic Diffuser Stone With Fine Bubble Made Of Corundum +
Ceramic
Product Description
There are two kinds of ceramic microporous aerators: semi corundum
and full corundum. The semi corundum aerator has the advantages of
high efficiency and low consumption, reliable operation, not easy
to block, small resistance, large inflation volume and strong
agitation. All corundum aerator, corundum aerator cap and tray are
combined to form an integrated all corundum aerator head. It
overcomes the air leakage between ABS tray and corundum cap after
using the semi corundum aerator for a long time.
Product Features
1. Simple structure, only three parts in one body, fast assembly
speed and easy pool bottom installation and debugging.
2. Good sealing performance, to prevent different materials from
not close contact, resulting in air leakage.
3. The surface area is large. It is estimated that the surface area
will increase by nearly 75%, which will also increase the aeration
volume, improve the oxygen charging efficiency, or expand the
service area
4. Good aeration and agitation, the original aerator only has
positive aeration, while the integrated aerator has both positive
and negative aeration at the same time, which can make the bottom
sewage more easily agitated and pushed upward.
Technology Parameter
| Model | Type | Connector | porosity | alkali resistance | Service area(m³) |
| DN110 | corundum aerator | 4 points internal thread connection | 35-51% | 97.10% | 0.15-0.31 |
| Size | Material | Bubble size | Acid resistance | Ventilation | Standard ventilation |
| 110mm | corundum+ceramics | 0.21μm-100μm | 97.70% | 1-1.5m³/h | 9-15m³/h |
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory located in Yixing Wuxi ,we have specialized in
various fillers ,air diffuser and other environment protection
equipment,also our company is focusing on researching developing a
variety of novel sewage wastewater treatment filler and aeration
system .
Q: How long is your delivery time?
A: Generally it will only take about 5-10 days if the goods you
need are in stock as we just only need some time to pack the goods
as the customer's request. otherwise it will cost about 15-20 days
to arrange the factory to produce and packing .but also some
customer request customization the special size then it will take
more time and the specific date will depend on the technology.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=20000USD, 100% in advance. Payment>=20000USD, 30%
T/T in advance ,balance before shipment.
