Weather Resistance Solar Panel Street Light Anti Aging For Remote
Areas
Solar Street Light
Solar powered lighting items are more popular now because of the
rapid developments in photovoltaic and LED lighting technologies.
Besides the financial benefits, the right combination of
photovoltaic and high-efficiency LEDs has offered great
environmental benefits through clear renewable solar energy.
In this day and age, we even have a couple of generations of solar
powered lights based on a different structural design. These are
the new generation all-in-one solar street light and the last
generation split type solar street light.
Allinone solar street light can be installed in may application
fields!
Standard:
Carparks, paths and laneways
Private roads, gates and entraces
Remote areas:
Where wiring is nos economical or practical
Safety and security:
Playgrounds, courtyards
Entrances, exits and muster areas
Outside storage areas, perimeter lighting
Installation:
All-in-one solar street light is the fastest and easiest way to
install solar lighting and transform your area into well enlighten
one. Use the simple connection interface to install in any pole in
a professional way in the least amount of time possible.
If you can connect a cable,you can install a solar lighting
solutionin less than 10 minutes.
Make the solar panel face south while installing. Meanwhile, you
can adjust the angle between the lamp head and level (as follow),
you’d better reconcile the lamp head with local latitude.
Where to place the light pole?
To place the light pole into the best spot with good day
lighting.The light pole should be the length 4-6m, the thickness
2.0mm with material iron or steel, the diameter 50-90mm.
Unfold the knob of fuse ( see below ) and take out the insulating
film if the fuse sockets, to check up if the fuse working right or
not, and then tighten.
Place the lamp on the pole by its sleeve, special screw should be
used and steady installation should be ensured.
One Stop Easy Installation
All In One Integrated solar LED street lights, are widely used as
street lighting, road lighting, garden lighting, landscape
lighting, parking lots lighting, courtyard lighting etc. The All In
One Integrated solar street lights are the high cost effective
solution with lower initial investment and free from labor cost on
earthwork construction and installation of batteries, solar panels,
and accessories.
No earthwork construction for battery, no labor installation for
solar panels and connections, leads to lower initial investment
than traditional solar street light system.
80% Energy Saving & ZERO energy cost
As high as 200 lumen/watt system lighting efficiency, 80% energy
saving compared to traditional lights. 100% electricity from solar
leads to ZERO energy cost of operation.
3-7 Lasting Days in Rainy and Cloudy Days
The light output of full brightness or DIM mode half brightness is
controlled by PIR motion sensor detecting any movements.
Solar Led Street Light Specification:
| Lamp Body Material: | ABS | Product Name: | All In One Solar Led Street Light |
|---|
| IP Rating: | IP65 | Light Source: | LED |
|---|
| Power Supply: | Solar | Rated Life: | ≥50000hours |
|---|
| CRI (Ra>): | 80 | Beam Angle(°): | 120 |
|---|
| Application: | Road, Highway, Courtyard, Outdoor, Etc. | Feature: | Integrated All In One |
|---|
Model No. | Solar Panel | Life PO4 Battery | LED Qty | Installation Height | Irradiated Area | Working Model |
| MYST-122-10W | 6V6W | 5000MAH | 20 PCS | 2-3 m | 30-40 sqm | Light control+time control+remote control |
| MYST-122-20W | 6V10W | 9000MAH | 40 PCS | 3-4 m | 40-50sqm | Light control+time control+remote control |
| MYST-122-30W | 6V12W | 12000MAH | 60 PCS | 3-4 m | 40-50sqm | Light control+time control+remote control |
| MYST-122-50W | 6V15W | 15000MAH | 81 PCS | 4-5 m | 70-90sqm | Light control+time control+remote control |
FAQ
1. Are you manufacturer?
Yes,Lasom Lighting team have over 30 experience in lighting
business.
2. Can you produce according to the samples or drawings?
Yes, we can produce by your samples or technical drawings. We can
build the molds and fixtures
3. What is the lead time?
It usually takes 25 to 35 days after sample confirmation and
receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
4. What is your terms of delivery?
We accept EXW,FOB,CIF,etc. You can choose the one which is the most
convenient or cost effective for you.
5. How to solve the quality problems after sales?
Take photos of the problems and send to us. We will make a
satisfied solution for you within 24 hours after we confirm the
problems.
6. Do you have any MOQ limit for led light order?
Low MOQ, 1pc for sample checking is available.
