Grid Battery Pasting Belt For Lead Acid Battery Manufacturing
Our this synthetic type battery pasting belt is an upgraded version
of the ordinary one. The overall seamless design avoids the
breakage zone, ensures the quality of the Plates, improves the
working life. According to the production experience of various
battery factories for many years, the applicability of the pasting
belt have been greatly improved, making it suitable for most grid
pasting machines on the market, such as Gang Lih-taiwan,Hadi,
Sovema, Wirtz, Mac, Golden sun light, Hilans etc.
Some of commonly used size FYI:
Thickness(MM) ---------------------- Length(MM)
---------------------- Width(MM)
8 ----------------------------------- 1770
------------------------------ 420
10 ------------------------------------ 3900
------------------------------ 762
8 ------------------------------------ 2540
----------------------------- 330
8 ------------------------------------ 1870
----------------------------- 220
8 ------------------------------------ 1870
----------------------------- 365
6 ------------------------------------ 1930
----------------------------- 230
8 ------------------------------------ 1905
----------------------------- 220
6 ------------------------------------ 1800
----------------------------- 220
8 ------------------------------------ 2566
----------------------------- 356
If you have other demands about the size, kindly let me know,we
accept customization.
Features
Uniform paste,gram weight deviation within 3-4g
No deformation,elongation less than 1%
Long working life,can pasting pole plate 1million piece
It suitable for pasting positive and negative plate,hard and soft
cream is appropriate.
Application:
Our seamless pasting belt is mainly used for the pasting machine in
the battery factory. We could produce the belts according to your
size and your pasting machine, attached some application photos for
your reference first:
Daily maintenance and instructions
1.It should be used within four months after received
2.It should be stored in a low-temperature dry environment,to avoid
direct sunlight
3.It should be check if there have any sundries on the both side of
the belt,in order to avoid scratching the belts
4.It should be as wet as possible when use the belt
5.It should be washed with a clean surface after half-working day
Note:on the basis of the working life,good maintenance can increase
the working life
Design Your Pasting Belt
Material:100% cotton/Synthetic Fiber -----------------------------
Your request material:__________
Thickness:5-10mm
------------------------------------------------------- Your
request width:____________
Width and length can be customed --------------------------------
Your request:_________________
Your commonly used pasting machine(Improve the applicability of the
belt):________________
Contact us to get the quotation details.
