Hose Industrial Slitterring Round Blade for Cutting Hydraulic Hose
and Rubber
| 1. Blanking | Selecting material according the customers' request. |
| 2. Forging | Increasing the density of the material. |
| 3. Tempering | Lowering temperature for processing. |
| 4. Finishing machining | Making the material shaped |
| 5. Inspection | Checking the products if they are the same as the drawing. |
| 6. Hardening | Increasing the hardness of products and the material. |
| 7. Annealing | To incrase abrasion resistance, need to anneal thermal insulation
for long time. |
| 8. Hardening and tempering | Hardening and tempering the parallel of products for processing. |
| 9. Coarse grinding | Coarse grinding the surface of products to be shaped. |
| 10. Accurate grinding | Supergrinding to incrase the precision and the parallel of
products. |
| 11. Testing | Refusing the unqualified products into the market. |
| 12. Packaging | Different products, different packaging |
Zhijing Precision Machinery (Shanghai) Co., Ltd. is manufacturing
all kinds of industrial blades, knives, seal jaw sets, bag forming
sets and accessories, that are used in packaging industry, paper
industry, plastic industry, steel industry, food industry, medical
industry, tobacco industry and other industrial usages.
These parts are produced according to drawings, product samples or
specially developed by our engineers. Due to the use of high
quality materials and good workmanship, we are able to realize
major lifetime improvements and reduce machine downtime for our
customers.
In addition, our products have short delivery times with high
reliability. Off-the-shelf or customized products are available
from us with the highest quality in China. In many cases we surpass
the quality, delivery time and lifespan expectations of our
customers.
| Φ46×35×2.2mm Φ118×80×1mm |
| Φ61×40×1mm Φ105×75×1.2mm |
| Φ66×50×6mm Φ130×90×1.2mm |
| Φ66×50×14mm Φ140×95×1.2mm |
| Φ68×40×1mm Φ140×90×1mm |
| Φ68×46×0.5mm Φ140×95×1mm |
| Φ70×40×1mm Φ100×70×1.2mm |
| Φ75×45×1mm Φ100×75×1mm |
| Φ75×50×5mm Φ90×60×1.2mm |
| Φ98×66×1mm Φ130×80×1.2mm |
| Φ100×66×1mm Φ142×116×1.2mm |
| Φ102×75×1mm Φ130×100×1.2mm |
| Φ105×70×1.2mm Φ150×80×2mm |
Zhijing made hose cut-off blades are superior to original
manufacturers’ blades – lasting up to 5 times as long as other
blades! And if you’re
looking for value, our hose cutting blades are competitively
priced, as well, meaning you get an excellent value for your money.
Hydraulic hose is one of the most indestructible components you’ll
ever encounter. It has to be strong enough to handle high fluid
pressures,
pressure cycling, repeated bending, high temperatures and remain in
service for years. But the same material characteristics that make
hydraulic
hose stand up to such tough conditions also make it difficult to
cut. Traditionally, most hose cutoff machines have used an abrasive
wheel. The
wheel runs at high speed to grind or melt away rubber and other
soft materials in the hose and high-strength steel reinforcement
wires. Abrasive
wheels generate heat, smoke, and debris that can contaminate
hydraulic systems.
Steel blades are the cleaner, more effective way to cut hose. The
circular blade slices the hose rather than cutting a path through
it, so it does not
leave debris in the hose. The cutting operation set-up causes the
hose to be bent, applying tension to the hose so that it pulls away
from the blade
during the cut. This bending action makes cutting easier and keeps
the hose ends from rubbing against the spinning blade. Because the
hose
opens up faster than the knife penetrates, the hose does not pinch
the blade. Since there is little contact between the sides of the
blade and the
hose, no smoke is generated. You end up with a quality, clean cut,
fast!
