1000M SFP Fiber to Ethernet Media Converter
MC1310121D1
1.Overview
IEEE802.3z/AB 1000Mbps Gigabit Ethernet supports two types media
fornetwork connection such as 10/100/1000Base-T and 1000Base-SX/LX.
The media converter is designed with a switch controller and buffer
memory that connectstwo types segments to operate smoothly. With
internal power unit, it providesgood stability and reliability.
3.LED Description
Thereare six LED At Front View of Gigabit
SFP Converter
TP 100 | Lit when TP speed is 100Mbps |
TP 1000 | Lit when TP speed is 1000Mbps |
TP Act | Lit when TP connection is good. Blinks when TP data is transmitting. |
TP FDX | Lit when TP full-duplex mode is active. Off when TP half-duplex
mode is active. Blinks when collision signal is present. |
FX Act | Lit when TP connection is good. Blinks when TP data is transmitting. |
PWR | Lit when +5V power is coming up. |
4.Fiber TechnicalSpecifications
| 1000Base-SX | 1000Base-LX-10 |
Connector type | LC | LC |
Fiber type | Multi-mode | Single-mode |
Wavelength | 850nm | 1310nm |
Max Distance | 62.5µm: 224m 50µm: 550m | 10Km |
Min TX PWR | -11.0dBm | -12.0dBm |
Max TX PWR | -6.0dBm | -5.0dBm |
Sensitivity | < -18dBm | < -21dBm |
Link Budget | 7.0dBm | 9.0dBm |
| 1000Base-LX-30 | 1000Base-ZX |
Connector type | LC | LC |
Fiber type | Single-mode | Single-mode |
Wavelength | 1310nm | 1550nm |
Max Distance | 30Km | 70Km |
Min TX PWR | -8.0dBm | -5.0dBm |
Max TX PWR | 0dBm | 0dBm |
Sensitivity | < -25dBm | < -25dBm |
Link Budget | 17.0dBm | 20.0dBm |
5.Installing the Converter
1. Attach a SFP to SFP Cage on the converter
2. Attach fiber cable from the Converter to thefiber network.. The
fiber connections must be matched: transmit socket toreceive
socket.
3. Attach a UTP cable from the TP network deviceto the RJ45 port on
the Converter.
4. Connect the power cord to the Converter andcheck that the Power
LED lights up. The TP Act and FX Act LEDs will light whenall the
cable connections satisfactory.
6.Technical Specifications
The Converterconforms to the following standards:
Standards: IEEE 802.3z/AB 10/1001000Base-T
1000Base-SX/LX
UTP Cable: Cat.5e orCat.6 cable and upto 100m.
Fiber Cable:
1000SX:50/125,62.5/125µm multi-mode
1000LX: 9/125µm single-mode.
Data Transfer Rate:
2000Mbps for full-duplex at1000Mbps speed.
LED Indicators:
TP Act, Fdx, 100, 1000, Power,FX Act
TP Flow Control: NWay auto-negotiation
Fiber FlowControl: NWay at full-duplex mode
Power Requirement: 220V(175-260V)AC,50Hz
Ambient Temperature: 0 50
Humidity: 5% 90%
DimensionsInternal:26×70×93mm
ExternalPower: 40×1100×140mm(H×W×D)
