1U 2U SC or LC Connector Erbium Doped Fiber Amplifier with Optional
WDM
Erbium Doped Fiber Amplifier (EDFA) can be used in HFC system about
CATV and SDH system in Telecom. It can provide preamplification,
line amplifier and power amplifier. In multiple network
applications, it is with good operation record, high stability.
Features
● Using erbium and ytterbium Co doped double clad fiber technology
● The built-in low noise preamplifier without EDFA cascade reduces
the deterioration of CNR and MER greatly
● The output port is optional
● 1U:SC connector 4~16 ports optional; LC connector 8~32 ports
optional, WDM can be selected
● 2U:SC connector 16~64 ports optional; LC connector 32~128 ports
optional; optional WDM
● Low noise coefficient: 0dBm input < 5dB
● The perfect network management interface, conforms to the SNMP
network management protocol
● The server's mature dual power hot backup structure and the
intelligent temperature control system controlled by microcomputer
can effectively improve the system reliability
Applications
● CATV trunk and distribution network
● WDM system
Ordering Information
1U:
Example:SPOA-50EYA1-16*22-SA24SA-WSP
Explain:This 1U device is the erbium and ytterbium Co doped high power
fiber amplifier with 16 port output, output 22dBm, input connector
SC/APC, main power 220V power supply, auxiliary power 48V power
supply, output connector SC/APC, WDM, WDM joint SC/PC.
2U:
For example: SPOA-50EYA2-16*22-SA24A-WSU-O
Explanation: This is 2U chassis optical amplifier device,16 output
ports, each port output power is 22dBm, input optical connector is
SC/APC, main power supply voltage is 220V. Vice power supply
voltage is 48V,output port optical connector is SC/APC ,with
WDM,WDM connector is SC/UPC, built in optical switch.
