10G BIDI SFP+ Transceiver Modules up to 80km Simplex LC Interface
with DDM Function
10G BIDI SFP+ transceiver modules are designed for bi-directional
10G serial optical data communications such as IEEE 802.3ae
10GBASE-BX by usually using 1330(1270nm) transmitter and 1270(1330)
nm receiver. Sopto supplies OEM service and Third-Party(Cisco,
Juniper, HP, Dell, etc.) compatible fiber optic transceivers.
Features
● Simplex LC Interface
● Built-in digital diagnostic functions
● 1270nm&1330nm or 1490nm&1570nm
● Up to 11.3 Gbps Bi-directional Data Links
● Single Fiber Bi-Di SFP+ Optical Transceiver
● Transmission distance up to 80km over SMF
● Operating Case Temperature: Standard: 0~70°C; Extended: -20~85°C;
Industrial: -40~85°C
Compliant
● RoHS-6
● SFF-8472
● SFP+ MSA
● IEEE 802.3ae 10GBASE-BX or SDH/SONET standards
Sopto fiber optic transceiver took the first lead to pass the
ISO9001 quality system, the requirements of European CE, RoHS.
Pin Descriptions
Figure1.Elecctrical Pin-out Details
| Pin | Symbol | Name/Description |
| 1 | VEET [1] | Transmitter Ground |
| 2 | Tx_FAULT [2] | Transmitter Fault |
| 3 | Tx_DIS [3] | Transmitter Disable. Laser output disabled on high or open |
| 4 | SDA[2] | 2-wire Serial Interface Data Line |
| 5 | SCL[2] | 2-wire Serial Interface Clock Line |
| 6 | MOD_ABS[4] | Module Absent. Grounded within the module |
| 7 | RS0[5] | RS0 for Rate Select: Open or Low = Module supports ≤4.25Gbps High = Module supports 9.95 Gb/s to 10.3125 Gb/s |
| 8 | RX_LOS[2] | Loss of Signal indication. Logic 0 indicates normal operation |
| 9 | RS1[5] | No connection required |
| 10 | VEER[1] | Receiver Ground |
| 11 | VEER[1] | Receiver Ground |
| 12 | RD- | Receiver Inverted DATA out. AC Coupled |
| 13 | RD+ | Receiver DATA out. AC Coupled |
| 14 | VEER[1] | Receiver Ground |
| 15 | VCCR | Receiver Power Supply |
| 16 | VCCT | Transmitter Power Supply |
| 17 | VEET [1] | Transmitter Ground |
| 18 | TD+ | Transmitter DATA in. AC Coupled |
| 19 | TD- | Transmitter Inverted DATA in. AC Coupled |
| 20 | VEET [1] | Transmitter Ground |
Notes:
1. Module circuit ground is isolated from module chassis ground
within the module.
2. should be pulled up with 4.7k – 10k ohms on the host board to a
voltage between 3.15Vand 3.6V.
3. Tx_Disable is an input contact with a 4.7 kΩ to 10 kΩ pullup to
VccT inside the module.
4. Mod_ABS is connected to Veet or VeeR in the SFP+ module. The
host may pull this contact up to Vcc_Host with a resistor in the
range of 4.7 kΩ to10 kΩ.Mod_ABS is asserted “High” when the SFP+
module is physically absent from a host slot.
5. RS0 and RS1 are module inputs and are pulled low to Veet with
> 30 kΩ resistors in the module.
Recommended Interface Circuit
Figure2. Host Board-Power Supply Filters Circuit
Figure3. Host-Module Interface
Mechanical Dimensions
A : LC Receptacle
B : SC Receptacle
All-optical transceivers are RoHS compliant and could be 100%
compatible with branding equipment, such as Cisco, Extreme, Juniper, HP, H3C, Linksys, Huawei, Alcatel-Lucent,
Foundry, Nortel, Force10, etc.
If you want to know more about the exact information of the
specified transceiver or get the price
Applications
● SONET OC-192 / SDH STM-64
● OTN ITU-T G.709
● 10GBASE-SR/LR/ER/ZR Ethernet
● 10X/8X/4X/2X/1X Fibre Channel
Ordering Informations
| Products | Data Rate(Gbps) | Distance | Fiber | Output Power(dBm) | Sensitivity(dBm) | Interface | Temp. | DDM |
SPT-PB2733TG-L10/ SPT-PB3327TG-L10 | 9.95~11.3 | 10km | SM | -6～-1 | -14.5 | Simplex LC | 0-70℃ | D |
SPT-PB2733TG-L20/ SPT-PB3327TG-L20 | 9.95~11.3 | 20km | SM | -3～-2 | -14.5 | Simplex LC | 0-70℃ | D |
SPT-PB2733TG-L40/ SPT-PB3327TG-L40 | 9.95~11.3 | 40km | SM | 0～5 | -16 | Simplex LC | 0-70℃ | D |
SPT-PB2733TG-L60/ SPT-PB3327TG-L60 | 9.95~11.3 | 60km | SM | 1～5 | -22 | Simplex LC | 0-70℃ | D |
SPT-PB47TG-L80/ SPT-PB74TG-L80 | 9.95~11.3 | 80km | SM | >1 | -22 | Simplex LC | 0-70℃ | D |
