HRA92.5 Long Lifetime Blank Solid Tungsten Carbide Pipe Stock Round
Rod
We manufactured and stocked unground and ground carbide rods for
you. For more size information, please kindly email or call us.
Carbide pipe Size List
| D | DTol | d | dTol | L | Tol |
| mm | mm | mm | mm | mm | mm |
| 2.5 | +0.20～0.50 | 0.3 | ±0.05 | 330 | 0～+5.0 |
| 3.0 | +0.20～0.50 | 0.4 | ±0.05 | 330 | 0～+5.0 |
| 4.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 5.0 | +0.20～0.50 | 0.4 | ±0.05 | 330 | 0～+5.0 |
| 6.0 | +0.20～0.50 | 1.0 | ±0.05 | 330 | 0～+5.0 |
| 8.0 | +0.20～0.50 | 1.5 | ±0.05 | 330 | 0～+5.0 |
| 10.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 12.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 14.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 16.0 | +0.30～0.60 | 2.0 | ±0.05 | 330 | 0～+5.0 |
| 18.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 20.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 22.0 | +0.40～0.80 | 3.0 | ±0.05 | 330 | 0～+5.0 |
| 24.0 | +0.40～0.80 | 4.0 | ±0.05 | 330 | 0～+5.0 |
| 26.0 | +0.40～0.80 | 5.0 | ±0.05 | 330 | 0～+5.0 |
| Grade | YL10.2 (K25-K35) |
| Co | % | 10 |
| WC | % | 90 |
| Density | g/cm3 | 14.5 |
| HV30 | kg/mm2 | 1600 |
| Hardness | HRA | 92.5-92.8 |
| Bending Strength | N/mm2 | >3800 |
| Porosity | A B C | A02B00C00 |
| WC Grain Size | μm | 0.6 |
Application
Application of tools:
Twist drill,End mill,Tap
Applications of material:
◆ Cast iron
◆ Stainless steel,Heat-resistant steel,Hardened
steel(hardness<60HRC)
◆ Nickel-based, Titanium alloys
We offer:
- pressed and extruded unground, ground and polished rods with or
without chamfers
- rod products that can be ground to h6 tolerances
- carbide rod with one or two parallel holes
- a variety of grades that provide exceptional wear and impact
resistance
- grades for use in end mills, reamers, drills, countersinks,
engraving tools, routers, and other rotary tools
- grade for stamping /colding/ forging dies
Our products are sinter-HIP processed for ISO 9001:2015 certified
manufacturing facilities.
Solid Rods and Rods with Coolant Hole
We manufactures 12” (330mm) length rods with single hole, straight
two-hole in diameters from 0.3mm to 33mm. High-performance gun
drill rod blanks are available.
Cut-to-Length Rod
We have one of the largest and most complete lines of ground CTL
selections. Premium grades, standard and micro-finished surface
finish, and h6 ISO diameter tolerances in inch and metric lengths
and diameters. Special preform features are available, including
male center, female center, ballnose, step reduction, and shaped
points.
Production Process of Tungsten Carbide Rod:
Power mixing-Pressing-HIP sintering-Blank- Processing- Finished
Various grade for your choice
| Grade | YL10.2 | YG6 | YG6X | YG10X | YG8 | YG15 |
| ISO Range | K25-K35 | K20 | K10 | K35 | K30 | K40-K50 |
| WC+others % | 90 | 94 | 94 | 90 | 92 | 85 |
| Co % | 10 | 6 | 6 | 10 | 8 | 15 |
| Grain Size μm | 0.6 | 0.8 | 0.6 | 0.6 | 0.8 | 0.8 |
| Density g/cm3 | 14.5 | 14.9 | 14.9 | 14.5 | 14.6 | 14.1 |
| Hardness HRA | 92.5-92.8 | 89.5 | 92 | 90 | 89 | 86.5 |
| T.R.S N/mm2 | 3800-4000 | 2150 | 2000 | 2200 | 2200 | 2400 |
Tungsten carbide rod grades are mostly fine and ultra fine grain
with high performance. It's suitable for processing of non-ferrous
metal, plastic materials, carbon fiber, chilled cast iron and
heat-resistant alloy steel, high-temperature alloy steel, stainless
steel, high manganese steel, etc. It can manufacture of drill bits,
end mills, and reamers. Tungsten carbide bushing widely used in
stamping tools and wear-resistant tools, etc.
Production Advantages
1. we using 100% WC and the raw matearils of CO.
2. High hardness HRA89-93 ,good bending strength TRS
2800-4200.N/mm2
3. Long probation,stamping.
4. Has good wear resitance.
5. Professional manufacturer for more than 10years experience.
6. With the HIP sintered technology,the structure of tungsten
carbide is more uniform,more dense,the TRS can be raised more than
20%
7. We make tungsten carbide rods extruded or pressed.
8. Customization is acceped
Our packing and shipping
Based on Detail products, we use different Standard packing
suitable overseas shipment.
For carbide rod packing as following
1. outsizde carton or plywood case
2. inner packing is plastic box or small carton with cotton or
paper protection
3. Shipping:UPS,TNT,EMS,Fedex,DHL, shipment by sea, or as you
request.
