Nitrogen Protection Reflow Soldering Machine,Lead-Free Reflow Oven
12 Zones PCB Soldering Robot,SMT Reflow Oven R12-N
Specification:
| Model | JAGUAR R12-N |
Heating System | Number of heating zones | UP 12/BOTTOM 12 |
| Number of cooling zones | up 3/bottom 3 |
| Length of heating zones | 4706mm |
| Heating mode | hot air |
| Cooling Mode | Air Oven:Forced air; Nitrogen Oven: Water Chiller |
| Exhaust Volume | 10m³/min * 2 exhausts |
Conveyor System | Max. Width of PCB | 450mm |
| Mesh belt width | 500mm |
| Transmission Direction | L→R(or R→L) |
| Transmission Net Height | 900±20mm |
| Transmission type | Mesh and chain |
| Range of rail width | 0-400mm |
| Conveyor speed | 0-2000mm/min |
| Auto/manual Lubrication | standard |
| Fixed rail side | Front rail fixed(option: rear rail fixed) |
| Components high | Top and bottom 25mm |
Control system | Power supply | 5 line 3 phase 380V 50/60Hz |
| Total power | 80kw |
| Starting power | 70kw |
| Normal power consumption | 14-16KW |
| Warming time | About 20 mins |
| Temp. setting range | Room temperature-300℃ |
| Temp. control method | PID close loop control & SSR driving |
| Temp. control precision | ±1℃ |
| Temp. deviation on PCB | ±2℃ |
| Data storage | Process Data and status storage(80GB) |
| Nozzle plate | Aluminum Alloy Plate |
| Abnormal Alarm | Abnormal temp. (extra-high/extra-low temp.) |
| Board dropped alarm | Tower light:Yellow-warming, Green-normal, Red-abnormal |
General | Dimension(L*W*H) | 7200×1400×1550mm |
| Weight | 3000KG |
| Color | Computer gray |
1. Detailed description
1.01 Dimensions 7200 * 1350 * 1600mm
1.02 Body Color Ivory
1.03 Net weight 2800kg
1.04 exhaust volume 10m3 / min × 2 channels
1.05 power supply 5 wires 3 phases; 380V 50 / 60HZ; (□ O: 220V 50 /
60HZ)
1.06 Power Starting Power 70kw Consumption Power 14-16kw
1.07 Heating time about 30mins
1.08 temperature range room temperature--300 ° C
1.09 PCB board temperature distribution deviation ± 1.5 ℃
1.10 Mesh belt width 500mm
1.11 PCB maximum width 400mm
1.12 Part height 20mm above 30mm
1.13 Transportation direction left to right (□ O: right to left)
1.14 Rail fixing method Front fixing (□ O: Rear fixing)
1.15 Height of rail from ground 900 ± 20 mm
1.16 Transport speed 300-2000mm / min
1.17 Parameter storage A variety of production setting parameters
and conditions can be stored
1.18 Abnormal alarm Ultra high or low temperature alarm, sound and
light two ways
1.19 Lubricating oil can be switched automatically and
automatically
Device configuration
2.01 Number of heating / cooling zones Upper 12, lower 12 heating
zones, upper 3 / lower 3 cooling zones
2.02 Control system WIN 7+ Lenovo business computer + PLC
2.03 Temperature control mode PID closed-loop control + SSR drive
2.04 temperature test line 3
2.05 Transportation system Rail + mesh belt transportation
2.06 Transportation control mode 4 inverters + imported
transportation motor
2.07 chain structure
2.08 Guide rail structure
2.09 Rail width adjustment
2.10 Upper cover start The upper cover is opened electrically to
facilitate cleaning in the furnace
2.11 UPS power supply power failure backup PCB production completed
Use comprehensive closed protective design in hearth, protect
nitrogen againest going away, make oxide to 150PPM at minimum,
low-level nitrogen-consuming,lower than 18m3/h in 500-1000ppm
oxygen,Full fill with nitrogen and oxygen concentration monitored,
draw samples from every heating zone,oxygen concentration can be
inspected by auto and manual.
Machine with Nitrogen system
1. Nitrogen flow controller: normal nitrogen-consuming:
20m3/hr.@500ppm~1000ppm(oxygen concentration)
2. Full-auto oxygen analysis instrument: fast response time,
Complete self diagnostic test important function and parameters
3. colling-water machine: 3HP; Adequate cooling capacity satisfies
the requirement of lead-free craft
4. Flux management:Nitrogen furnace cycle standard air filter,
optimize the environment of furnace, easy to maintenance.
1. Detailed description
1.01 Dimensions 7200 * 1350 * 1600mm
1.02 Body Color Ivory
1.03 Net weight 2800kg
1.04 exhaust volume 10m3 / min × 2 channels
1.05 power supply 5 wires 3 phases; 380V 50 / 60HZ; (□ O: 220V 50 /
60HZ)
1.06 Power Starting Power 70kw Consumption Power 14-16kw
1.07 Heating time about 30mins
1.08 temperature range room temperature--300 ° C
1.09 PCB board temperature distribution deviation ± 1.5 ℃
1.10 Mesh belt width 500mm
1.11 PCB maximum width 400mm
1.12 Part height 20mm above 30mm
1.13 Transportation direction left to right (□ O: right to left)
1.14 Rail fixing method Front fixing (□ O: Rear fixing)
1.15 Height of rail from ground 900 ± 20 mm
1.16 Transport speed 300-2000mm / min
1.17 Parameter storage A variety of production setting parameters
and conditions can be stored
1.18 Abnormal alarm Ultra high or low temperature alarm, sound and
light two ways
1.19 Lubricating oil can be switched automatically and
automatically
Device configuration
2.01 Number of heating / cooling zones Upper 12, lower 12 heating
zones, upper 3 / lower 3 cooling zones
2.02 Control system WIN 7+ Lenovo business computer + PLC
2.03 Temperature control mode PID closed-loop control + SSR drive
2.04 temperature test line 3
2.05 Transportation system Rail + mesh belt transportation
2.06 Transportation control mode 4 inverters + imported
transportation motor
2.07 chain structure
2.08 Guide rail structure
2.09 Rail width adjustment
2.10 Upper cover start The upper cover is opened electrically to
facilitate cleaning in the furnace
2.11 UPS power supply power failure backup PCB production completed
JAGUAR SMD Soldering Machine in Thailand Customer Factory:
