Jaguar High Speed Chip Mounter for SMT Production Line
[technical parameters]
Number of feeders:64pieces
Number of mounting head:6head
Number of pallets:6pieces
Average power:500W
positioning accuracy:0.01mm
Nozzle buffer range:4.5mm
Power Supply:220V, 50Hz
Compressed air: 0.5-0.6Mpa
Drive motor: Panasonic servo motor /HW-QiGn stepper motor
Identification mode: six head synchronous identification
Suction nozzle vacuum source:High speed on-off vacuum generator
with vacuum destruction
Maximum board area:625×455mm XY
Maximum range of motion:629×679mm Z axis maximum range:20mm
Belt feeder: 8, 12, 16, 24mm and vibration feeder (can be attached
to the chip)
Maximum theory speed: 15000 Pcs/ hours LED,
Resistance capacitance actual patch speed: 12000 Pcs/ hours
Hybrid visual mount average patch speed: 8500Pcs/ hours
XYZ drive rail: TBI high precision heavy duty linear guide rail.
Motion drive system: Panasonic AC servo -A6
Driver Operating system: Based on the Windows operating system,
China JAGUAR record company independent research and development automatic placement machine operating system, support Windows XP,
win7 operating system
Component angle: 0-360 degrees at any angle, the movement of
synchronous rotation X/Y
Mode of operation: QiGn-2017 version of intelligent curve
acceleration and deceleration linkage system
MARK point positioning: automatic scanning (can be arbitrarily set
MARK points)
Intelligent alarm: automatic correction, Automatic patch, lack of
material alarm
Into the plate mode: single segment from left to right
transmission, can be connected to the automatic connection platform
system, automatic PCB transmission positioning. Thimble
positioning, manual release plate.
Visual display: 17 inch industrial control display ratio 4:3
resolution 1280x1024
Programming mode: peer to Peer programming, visual programming, PCB file import,
etc.
Optimization mode: three automatic optimization modes (including
V2017 intelligent optimization)
To identify the number of cameras: a Mark recognition camera, six
high speed identification camera, a high resolution precision
recognition camera
Applicable scope:adapt 0402, 0603, 0805, 1206, two tubes,
transistors, SOT, and 40*40mm in the range of pin spacing is
greater than or equal to 0.3mm (0.5mm from the QFP BGA pin center),
etc..
Product weight:500KG Size (length and width): 1450*1370*1350mm
(without display and keyboard)
