Welded Gabion is high quality steel mesh. They can be filled on
site with hard durable stone materials to form mass gravity
retaining structures. Owing to their inflexibility, welded gabions
can not adapt to differential settlement or be used in water
courses. In comparison with woven wire gabions, welded gabions
offer a higher strength. In order to meet different project
requirements, various wire diameters and unit sizes are available
for welded gabion boxes.
Welded gabion are classified according to coating, as follows:
Style 1, consists of welded wire fabric made from wire which is
zinc coated before being welded into fabric. Spiral
binders, lacing wire, and stiffeners are produced from zinc coated
wire.
Style 2, consists of welded wire fabric which is made from uncoated
wire and the fabric is subsequently zinc coated after fabrication.
Spiral binders, lacing wire, and stiffeners are produced from zinc
coated wire.
Style 3, consists of welded wire fabric made from wire which is
coated with zinc-5 % aluminum-mischmetal alloy (Zn-5Al-MM) before
being welded into fabric. Spiral binders, lacing wire, and
stiffeners are also produced from zinc-5 % aluminum-mischmetal
alloy (Zn-5Al-MM) coated wire.
- Material: Q195,Q235,etc. T/S:300-1900N/MM2.
- Coating: Black,Electro Galvanized,Hot Dipped Galvanized,Galfan,Pvc
Coated,etc.
- Wire Diameter: 3mm,4.5mm,5.2mm,6mm,etc.
- Mesh Size: 75x75mm,etc.
- Width: 0.3m-2m,Special Size is available.
- Length: 0.3m-2m,Special Size is available.
- Height: 0.3m-2m,Special Size is available.
- Tie Wire: 3mm or according to customer’s demand.
|
| Nominal Box sizes(M) | No.of diaphragms(NO) | Capacity per box(M3) | Standard mesh sizes(MM) | Standard wire diameter(MM) |
| 1.0×1.0×0.5 | Nil | 0.50 | 50×75 75×75 100×50 100×100 | Heavily Galvanised or Alu-zinc coated wire 2.0,3.0,4.0,5.0 OR PVC coated on Heavily Galvanised or Alu-zinc coated wire
2.0/2.5,3.0/3.5,3.8/4.3 |
| 1.0×1.0×1.0 | Nil | 1.00 |
| 1.5×1.0×0.5 | Nil | 0.75 |
| 1.5×1.0×1.0 | Nil | 1.50 |
| 2.0×1.0×0.5 | 1 | 1.00 |
| 2.0×1.0×1.0 | 1 | 2.00 |
| 3.0×1.0×0.5 | 2 | 1.50 |
| 3.0×1.0×1.0 | 2 | 3.00 |
| 4.0×1.0×0.5 | 3 | 2.00 |
| 4.0×1.0×1.0 | 3 | 4.00 |
