ZJ-F shaftless mill roll stand
1.Symmetrical structure can also install two bundles of paper at
the same time,Paper can be used for non-stop for a job;Adopts
mechanical drive to complete the paper clamping, lifting, loosen,
move on, around translational motion, etc.
2.Each shaftless mill roll stand is equipped with two pieces of
paper guide, two set of paper car;paper guide the use of channel 14
and the guide post weld,paper car adopt 10mmwelded stell,the length
of track is 4500mm.
3.Manual dics brake,add screw following
4.Electric elements centralized control the electric
elements,expand chuck.
SF-280S fingerless type single facer
1.Adopt vacuum suction structure, with high pressure strong blower.
Suction with silencer.
2.Electric heating model with 18 heating tube
3.Base and wallboard cast iron wall,Wallboard
thickness130mm,universal Joints.
4.Corrugated roller material adopt 50CrMo Alloy steel
5.Pressure roller ¢ 284mm,surface grinding and
chrome-plated;cylinder control and remove up and down, 45 carbon
steel materials, quenching (with cushioning devices).
6.Pneumatic control glue to glue back, glue roller diameter
¢215mm,Engraved polished surface after a 36-line pit style textured
machined chrome plated,after scraping the roller surface polished
hard chrome plated.
7.Corrugated roller, pressure roller materials provided by the
Central Plains Steel,High on corrugating unilateral 0.15mm, 0.075mm
high pressure roller unilateral. Plus stopper. ¢160mm cylinder with
compression cylinder.
8.Preheat roll adopt seamless steel pipe production by tiangang ¢
300mm, connecting with metal Hose.
NC-1800 computer sheet cutter machine
1.Can save 200 sets of orders, replace the cutting specifications
quickly and accurately, non-stop for a single, and can achieve
computer networking, easy production management.
2.Knife shaft drive gear with eccentric shaft installation, to
achieve no backlash drive, high transmission accuracy.
3.Cross-cutting knife with inserts steel blade. Fixed blade blade
flat structure, more stable, more suitable for cutting high weight
and high toughness of cardboard, the shear force is small, long
blade life.
4.Pull paper roller outsourcing non-slip material, more
wear-resistant, accurate size.
5.Host base and wall panels with high-grade gray cast iron, high
strength, strong anti-vibration.
6.Servo controller control motor drive, 5.7 inch color touch screen
display, the project at a glance. cutting length: 300mm-9000mm,
cutting accuracy: ± 1.5mm (steady speed).
