60Hz 110V 3P4W 180KW Natural Gas Generator Set Natural Gas Backup
Power Supply Plant Rotations 1800
Main Features:
1) Gas engine produced in factory directly for stable performance
2) Easy for maintenance
3) Cost-effective.
4) Low operating and maintenance cost.
5) Environment friendly
6) Monitoring an extensive number of engine / alternator parameters
7) Gurantee accumulated 4000hours or 1 year whichever comes
firstly.
8) After-service overseas
ALTITUDE DERATION
If a engine jetted for high altitude is used at a lower altitude,
the lean air fuel mixture will reduce performance and may over-heat
and seriously damage the engine.
| Altitude (m) | Correctional coefficient |
| 1,500 | 0.97 |
| 2,000 | 0.94 |
| 2,500 | 0.91 |
| 3,000 | 0.85 |
| 3,500 | 0.82 |
Main Specifications
Model SP180N
fuel — Natural Gas
electrical output Continuous Power 225/180
frequency 60Hz
voltage 220/127V
gas inlet pressure 3-5kPa
dimension (soundproof type) 2600*1550*1650mm*mm*mm
net weight 3000kgs
NG consumption 0.275m3/kW.h
db(A)@7m — 59
Certificate — CE
ignition system — Impco
speed governor — Woodward
mixer — Venturi type
gas filter — Madas
zero regulator — Kromschroeder
Lambda auto control — Available on request with extral cost
catalyst converter — Available on request with extral cost
MCB — ABB
GCB — ABB
Controller ComAp
Engine model — STEYR T10
Engine type — 6 cylinders,4stroke,water-coolled
RPM — 1800
Compression Ratio — 11.0
Displacement — 9.7L
Oil capacity — 27 L
Charging voltage — 24V(DC)
Charging current — 5A(DC)
Starting system — Electic-start
Alternator model — Meccalte
phase — 3 phase 4 wires
insulation system — class H
protection — IP23
Cooling Type — air cooled
For more information about each Genset, please consult with your
sales representative.Thanks.
