Coated Steel Grain Storage Silos Corrosion Resistance Cement Tank
for Mortar Plant
Descriptions of Cement Storage Tank:
1. This cement silo is suitable to serve bulk cement and dry bulk
materials, such as fly ash. With its characteristics of waterproof,
moisture proof and simple use, it is mostly applied in concrete
mixing plant and warehousing industry.
2. On the structure, the cement silo is composed of steel structure
part, guardrail, feeding tube, filter, pressure relief valve and
other parts. The material level system mounted on the warehouse
system can display the location of the material. While the hole
device can remove stone caused by material deposition. And screw
pump is used to transport material to each position. In a word, it
is safe and convenient.
Parameters of Grain Storage Silos:
| Model | Tanker Diameter | Tanker Height | Capacity | Two sets silo transportation |
| MD50 | 3m | 7.6m | 50T | 1*40'HQ |
| MD60 | 3m | 7.6m | 60T | 1*40'HQ |
| MD80 | 3m | 11m | 80T | 1*40'HQ |
| MD100 | 3m | 12.5m | 100T | 1*40'HQ |
| MD200 | 4.5m | 19m | 200T | 1*40'HQ+1*20'GP |
| MD300 | 5.5m | 21.3m | 300T | 2*40'HQ |
| MD500 | 6m | 23.2m | 500T | In Bulk |
Features of Cement Storage Silo:
The cement silo has a cylindrical structure, and the bottom is
supported by four round tube legs. The whole silo is in the form of
steel structure and welded; the top is provided with a dust
collector and a pressure safety valve.
1. Cement tanks are often used as an accessory to concrete mixing
plants.
2. It is suitable for the installation of bulk cement and dry fly
ash. It has the characteristics of rainproof, moisture proof and
convenient use. The size can also be made according to the size
required by customers.
3. Generally, it is a cylindrical bracket structure. The upper part
has dust removal equipment to prevent dust leakage. The lower part
is equipped with a broken arch device to prevent the powder from
agglomerating, so that the powder is discharged smoothly, and the
material level sensing device is installed, and the chamber can be
grasped at any time. Material usage.
4. Generally, the bulk cement conveying vehicle is used to feed the
powdered gas into the warehouse; according to the structure of the
cement silo, there are generally two ways of discharging the
material. First, the lower part is connected with the screw
conveyor, and the screw conveyor is used to feed the powder into
the powder. The second measurement is pneumatic conveying (for
special structure cement tanks).
Precautions for use:
| Precautions for use |
|
| 1. Check if the line is unblocked before use. |
| 2. Before and after the ash is injected into the tank, the bulk
cement truck starts the vibration for 2-3 minutes. |
| 3. When the alarm on the cement tank alarms, stop the ashing to
prevent damage to the dustproof processor. |
| 4. When the air outlet is not smooth, check whether the dust filter
element is clogged. If it is blocked, it should be cleaned in time. |
| 5. Before cleaning the filter element, first bundle it with 2-3
lines to prevent deformation of the filter element during rinsing. |
| 6. When cleaning, you must wait for the filter to dry before you
can install it. |
| 7. After the filter element has been repeatedly cleaned, it should
be replaced in time when it has reached the purpose of dust
removal. |
