Biomass Pellet Bentonite Sand Dryer Machine Rotary Type Energy
Saving
Brief introduction of Three Return Dryer / Three Cylinder Sand
Dryer Machinery:
1. Three cylinder dryer use telescope-feed structure, dry the
material quickly
2. Simple design, self-insulation, improve the heat efficiency to
exceed 80%
3. Structure delicate, stable operation
4. good drying performance, coal consumption <8kg when drying 1t
material
Main Parameters:
| Type | TDS625 |
| Capacity(m3/h) | 4-6m3 |
| Diameter of drum(mm) | 2500 |
| Length(mm) | 2200 |
| Motor Power(kw) | 5.5 |
| Reducer | XWD-5 |
| Speed of drum rotation(r/min) | 4--10 |
| Moisture of end products (%) | 0.1%-0.8% |
| Coal consumption( kg/ per ton sand) | 43656 |
| Max. temperature inside ( ℃ ) | 700-750 |
| Outlet temperature | 30-60℃ |
The Classification of Coconut Fiber Dryer Machine:
1. According to the heat transfer between the drying medium and wet
materials, rotary dryer can be divided into direct heat transfer
rotary dryer (the direct contact and heat transfer between drying
medium and wet materials) and indirect heat transfer rotary dryer
(the heat required by the drying process is indirectly passed to
the wet materials by the cylinder wall).
2. Indirect heat transfer rotary dryer is rarely used due to its
low transmission efficiency and complex structure and it can be
divided into single passage rotary dryer and triple passage rotary
dryer according to the quantity of the shell drum.
FAQ:
1. Quality control
All the equipments offered by Mind are produced according to China
national standard drawings, nonstandard equipment will be produced
by the drawings confirmed by clients. We strictly follows ISO 9001:
2008 Quality management system. There is record in computer for
each equipment, spares can be easily confirmed when it is
necessary.
2. About our service
Mind Machine insists on providing clients with overall solutions
from equipment recommendation to debugging and installation, worker
training, technical support and maintenance.
Mind Machine has independent research and development system, our
experienced engineers and technicians can provide clients with
overall technical support, including material characteristic
analysis, crushing test and process optimization of flow
simulation. Our professional engineers will design the most
reasonable scheme for the real production line.
3. Installation
We have several experienced technicians with passports ready to go
for installation. When installation service is needed,client should
pay for technicians' round-way air tickets, salary(shall be
confirmed before leaving), food and lodging, and most importantly
to guarantee the technicians' safety.
4. Equipment warranty
Our warranty is 1 year for whole machinery .
For wear parts, we guarantee high quality parts for long-term
supply.
