Automatic Dry Glazed Hollow Bead Thermal Insulation Mortar
Production Line
Descriptions of Thermal Insulation Mortar Production Line:
The project for the production of glazed hollow bead, it has high
content of technology, features in time saving, convenient
operation, high uniformity and no residue, good sealing, no
vibration, little dust etc, the biggest advantage is no broken in
the process of glazed hollow bead mixing.
Mixing system: Mixing machine adopt cylinder mixer, which features in large
capacity, short mixing time, high output, high uniformity, no
residual, no broken. Finished product storehouse (well feeder)
secondary mixing materials to keep the homogeneous degree, at the
same time make the material to go into the packaging system
smoothly, well feeder use low speed feeder, to improve efficiency
and protect quality.
Ascension conveying system: the project use bucket elevator, which can effectively protect the
density standard of glazed hollow bead and improve hoist speed.
Dust removal system: the whole equipment fully closed no dust leak, use more filter, to
collect the dog-house and discharge hole dust together, optimize
the working environment, to ensure the employee health.
Working principles of Dry Mix Mortar Line:
According to requirements of the customers, the system can be
equipped with 3-6 bulk storage bins, the material in which will,
after being processed by the metering and batching system, be
conveyed to pending-for-mixing bin, and then fed into the
high-efficiency biaxial agravic mixer for continuous mixing.
The finished product in conformity with mixing accuracy
requirements can be sent to the finished products bin shortly after
mixed. Moreover, there is design with automatic rationing and
packaging machine at the bottom of finished products bin, allowing
for synchronous auto-packaging operation. Featured with easy and
convenient operation, high efficiency, it can both obviously reduce
labor intensity and effectively reduce dust pollution.
Features:
1. It features magnificent appearance, good quality, high
productivity and accurate mortar proportioning.
2. The dry mortar production line uses a centralized control
system, making the equipment easy to operate.
3. According to the layout type, it can be classified into tower
type, self tower type and series type. Its up to the customers
workshop area. The needed area is 500~5000m2.
4. We can provide one-stop service from design to installation
according to our customers' specific requirement.
Parameters of Glazed Hollow Bead Thermal Insulation Mortar
Production Line:
| Model | Output | Equipment height | Occupy area | Man power | Batching and packing |
| Simple type | 3T/H | 3-4m | 20m2 | 2-3 person | Manual batching |
| Automatic packing |
| Improved simple type | 4-5T/H | 3-4m | 20m2 | 2-3 person | Manual batching |
| Automatic packing |
| Semi-automatic type | 6-8T/H | 6-8m | 40-50m2 | 3-4 person | Automatic batching |
| Automatic packing |
| Automatic type | 10-30T/H | 8-12m | 80-100m2 | 3-4 person | Atuomatic batching |
| Automatic packing |
Main Configurations of Dry Mortar Production Line:
| Name | Specifications |
| Screw Feeder-1 | L:3.4m |
| 3.4m*φ219 |
| Power:4Kw |
| Mixing system | Power:7.5Kw*2 |
| Volume:3m³ |
| Size of mixing silo:1.5*1.6*1.2m |
| Lifting machine | L:3.6m |
| 3.6m*φ219 |
| Power:4Kw |
| Storage Silo | Volume:3m² |
| Packing system | LG-1 packing machine |
| Micro-computer controller |
| Power:4Kw |
