Rectorite Soapstone Raymond Grinding Mill Machine Dolomite Rock
Grinder
Technical Parameters of Dolomite Rock Grinder:
| Model | 3R2715 | 3R3016 | 4R3216 |
| Roller | Number | 3 | 3 | 4 |
| Diameter (mm) | 270 | 300 | 320 |
| Height (mm) | 150 | 160 | 160 |
| Ring | Diameter (mm) | 830 | 880 | 970 |
| Height (mm) | 150 | 160 | 160 |
| Maximum Feed Size (mm) | 15-20 | 15-20 | 20-25 |
| Finished Powder Size (mm) | 0.044-0.165 | 0.044-0.165 | 0.044-0.165 |
| Power of the Main Frame (KW) | 22 | 30 | 37 |
| Fineness of Final Product (mm) | 0.125 | Capacity (t/h) | 2.3-2.8 | 0.6-1.2 | 3.2-4.5 |
| 0.075 | 1.8-2.3 | 1.9-2.6 | 2.4-3.1 |
| 0.044 | 0.9-1.7 | 1-1.9 | 1.8-2.5 |
Product Descriptions of Rectorite Soapstone Grinding Machine:
1. Mind Raymond Mill is suitable for processing various
non-flammable and explosive mineral materials with Mohs hardness
less than 9.3 and humidity less than 6%.
2. It is widely used in metallurgy, construction, chemical
industry, mining, highway construction, etc. The particle size of
the final powder size can be adjusted between 50 and 325 mesh
(315-45 microns).
3. Examples of processed materials include quartz, feldspar,
barite, calcite carbonate, limestone, talc, ceramics, iron ore,
corundum, bauxite, phosphate rock, coal, etc. There are about 400
materials in total.
How Raymond Mill works:
1. The jaw crusher crushes the large materials to the required
particle size, and then is transported by the bucket elevator to
the storage hopper, and is evenly and continuously sent to the host
for grinding by the vibrating feeder.
2. The pulverized dust flows from the blower to the classifier.
After being classified, the particles that meet the fineness enter
the cyclone separator through the pipeline and are collected and
separated there.
3. They are discharged at the discharge valve and become the
finished product; the air flow is sucked into the blower by the
return pipe on the top of the cyclone collector.
4. The entire airflow system is sealed and circulates under
positive and negative air pressure.
Technology Advantages of Raymond Mill:
1. Raymond mill is vertical and takes small room. It is an
independent production system from feeding material to final
product.
2. Fineness of final product is even and the passing rate can be up
to 99%, which is incomparable by other mills.
3. The transmission device of the main frame uses close gear and
pulley, which runs smoothly and stably.
4. The important part is made by qualified steel and wearing parts
by high qualified wearable material.
5. As the electric control system is centralized, no people are
needed in operating room, and it is easy to maintain.
