PLC Cloth Pulse Dust Collector 0.5 - 0.7 Mpa Compressed Air Bag
Station
Brief Introduction of Impulse Dust Collector:
Pulse dust catcher on the basis of the bag filter to improve the
new type of efficient pulse dust collector, a combination of
chamber blow, the advantages of different pulse injection filter
overcomes the chamber soot cleaning strength is not enough, in and
out of the wind unequal distribution of faults, to expand the
application range.
Pulse dust collector is when dusty gas from the air inlet to
filter, first met in the middle of the outlet inclined plate and
baffle, air turned into the ash bucket, slowing down of air flow at
the same time, due to inertia effect, coarse particles of dust in
the gas directly into the hopper.
Dust in advance of the role, the airflow into the ash hopper then
fold and upward through internal filter bag dust containing metal
skeleton was set on the outer surface of the filter bag, after
purification, the upper gas into the filter bag chamber clean room,
packed into the outlet discharge, through the filter bag dust gas
purification process, with the increase of time and accumulate more
and more attached to the filter bag dust, increase the resistance
of filter pocket, the parameters of gradually reduce, to work, to
control the resistance within a certain range (140-170 mm water
column), once more than must be carried out on the filter bag dust,
soot triggered by pulse controller order of each control valve open
pulse valve, air bags of compressed air by spray torch each hole
scripture's tube into the corresponding filter bag, filter bag
instant swelling, make the product attached to the surface of the
filter bag dust fall off, filter bag to restore the initial state.
Clear the dust into the hopper, the ash discharge system out of the
body. Thus makes the product attached to the filter bag dust pulse
blowing soot cleaning cycle, purified gas through normally,
guarantee the dust removal system is running. Clear the dust into
the hopper, the ash discharge system out of the body.
Thus makes the product attached to the filter bag dust pulse
blowing soot cleaning cycle, purified gas through normally,
guarantee the dust removal system is running.
Parameters of Cloth Dust Collector:
| Model | DMC-32 | DMC-48 | DMC-64 | DMC-80 | DMC-96 |
| Total filtration area(m2) | 24 | 36 | 48 | 60 | 72 |
| Filtration wind speed(m/min) | 1.04～1.67 | 1.15～1.62 | 1.21～1.74 | 1.25～1.67 | 1.27～1.62 |
| Handling air volume(m3/h) | 1500～2400 | 2500～3500 | 3500～5000 | 4500～6000 | 5500～7000 |
| Number of filter bags | 32 | 48 | 64 | 80 | 96 |
| Air consumption(m3/min) | 0.032 | 0.048 | 0.064 | 0.08 | 0.096 |
| Inlet concentration(mg/Nm3) | 200 |
| Export concentration(mg/Nm3) | 50 |
| Injection pressure(Mpa) | 0.5～0.7 |
| Understand negative pressure(Pa) | 5000 |
| Equipment resistance(Pa) | ≤1200 |
| Pulse valve | Specification | 1" |
| Amount | 4 | 6 | 8 | 10 | 12 |
| Motor model | Y90S-2 | Y90L-2 | Y100L-2 | Y132S1-2 | Y132S1-2 |
| Power(KW) | 1.5 | 2.2 | 3 | 5.5 | 5.5 |
FAQ:
1. Are you the manufacture or trading company?
We are the manufacturer with professional produce experience on
导dry mortar machine more than 10 years. We own both of Domestic and
international sales department.
2. Where is your factory located?
Our factory is located in Zhengzhou city, Henan province, welcome
to visit.
3. Can you send the goods to my home?
Sure, usually we delivery the goods by sea to port, or plane to
airport.
But, if the customer asks us to delivery to home, we also can do
it.
4. Do you provide guarantee of the vibrating screen ?
A: Yes, all our products provides guarantees according to industry
standards.
5. Can I be your agent?
Yes, if you want to become our distributor in your place, we are
pleasure that we share profits and cooperate together.
More information of that, please contact with me. Thanks.
6. How long is the warranty?
The warranty is 12 month(except the wearing parts).Because
different usage, the wearing parts will have different life.
7. What is the real delivery time of your factory?
About 7 to 10 working days for general series products, meanwhile,
customized products would need 20 days to 40 days based on
different situations.
