Sandwich PUF / PIR Wall Panels Steel Wall Sandwich Panel Roll
Forming Machine
We are manufacture PUF sandwich panel for wall & ceiling panel
machines.
The raw material used for manufacturing PUF panel is CFC free and
fire retarded grade. Panels are provided with Tongue & Grove joints
and specially designed Cam locks to enhance airtight assembly. PUF
Sandwich panels are available with pre coated GI sheets, SS sheets
or as directed.
The standard density is 40 Kg. ± 2 Kg. m3. Also available in
different density.
Profile
Specification
| No. | Item | Description |
| 1 | Dimensions (L*W*H) | 400000 mm*2250 mm*2500 m |
| 2 | Steel Thickness | 0.25 mm- 0.8 mm |
| 3 | Sandwich Panel Thickenss | 50 mm - 300 mm |
| 4 | Roller Station | Up layer: 13 rows. Down layer: 14 rows |
| 5 | Working Speed | 4 m /min |
| 6 | Power | Main motor power: 4kw . Flying saw power: 2*0.75kw |
| 7 | Total Power | 32 KW |
| 8 | Machine Weight | 22 tons |
| 9 | Steel Coil Width | 1000 mm 1200 mm 1250 mm |
| 10 | Hydraulic motor power | 15 kw |
| 11 | Cutting Accuracy | ±2 mm |
Structure introduction
1 Manual uncoiler
It is used to support the steel coil and realize the uncoiling by
means of rotatory movement. The steel coil is uncoiled manually.
The capacity of this uncoiler is 1-2 Ton, and it is capable for
most of the cases.
2 Feeding
Receiving the raw material (steel sheet), it guarantees the
products are neat, parallel and everything is uniformity. Please
refer to the equipment regulation for knowing the function of
locate angle iron.
3 Machine material
In order to get high quality product, our machine adopts welded
steel frame structure, AC frequency conversion motor reducer drive,
chain transmission, roller surfaces polishing, hard plating, heat
treatment and chrome coating.
Roller chrome coated thickness: 0.05 mm
Roller material: Forging Steel 45# heat treatment, coated
4 Shearing mechanism
It adopts hydraulic station and automatic cut to length system to
realize the stably cutting of certain length of products. Side
guide rails are ensuring the cutting balance during the cuter fall
down, this mechanism is adopted to keep the burr and other edge
fault away. Material of the cutting blades: GCr12, processed by
heat treatment
5 Hydraulic system
It is derived by a Gear Pump. After filling the hydraulic oil into
the hydraulic oil tank, the pump could drive the hydraulic cylinder
to realize the cutting function.
The system includes a set of hydraulic tank, a set of a Gear Pump,
two hydraulic pipes .and two sets of Solenoid Valves. Power of The
Pump: 4kw.Hydraulic oil :40#
6 Electrical control cabinet
Panasonic PLC is adopted to organize all actions of the machine.
The length of workpiece is adjustable according to the setting of
on the PLC. Two optional control modes: automatic and manual. By
automatic mode, the machine can realize fully automatic working. In
order to make the machine has a long service life and easy
maintenance; we only adopt globally famous electrical components.
And by our special designed program, the human-computer interface
is very easy to be adopted by any level of operators.
7 Encoder
We understand that the encoder is a very important part of the
cutting to length system, so we only adopt the best quality from
OMRON Japen. And we offer enough matching couplings to make the
machine will never shut off due to the encoder problem.
Guarantee
1.Guaranteed against malfunctions due to manufacturing defects for1
years after date of purchase except Electrical parts.
2. Repairs will not be performed even during the guarantee period
in the follow circumstances
- Damage occurs due to a natural disaster
- Malfunction occurs due to user error
- Malfunction occurs due to modifications
- Malfunction occurs due to further movement or shipment after
installation
Payment terms
40% in advance as down payment
60% is paid before the shipment is processed
Delivery
FOB: Tianjin Xingang Port
The Delivery Time: 45 working days after the down payment is
received.
