100KG Steel Fast Heating Electric Resitance Furnace Reduction Gear
Tilting For Chain
Tilting Rotary Resistance Furnace Application
Rotary carburizing heat treatment furnace is standard energy-saving
batch type electric rotary furnace, is mainly used for small metal
parts and standard components for hardening, carburizing,
carbonitriding, tempering and so on heat treatment.
Tilting Rotary Resistance Furnace introduction
1. This furnace is heated by resistance,controlled by solid state
relay and intelligent instrument of Japan conductive company,and
using PID adjusting method,has the advantages of accurate
temperature control,simple operation,stable performance.
2. Working zone uses sealed cylinder-shaped chamber furnace made of
imported high temperature stainless steel,it rotates automatically
after the workpieces are putting into the furnace chamber to make
the workpieces be heated uniformly.It can also be passed into
various gas to meet various technological requirements of
workpieces.
3. The furnace body is supported by a bracket,can tilt upward or
downward under the control of tilt unit,and can discharge
automatically when it's tilting downward
Technical parameters of SP-RG45-9 Rotary Resistance Furnace
| 1. Working power supply | AC/3-phase 4-wire/380-440V/50/60Hz |
| 2. Rated power | 45Kw |
| 3. Rated temperature | 950°C |
| 4. Temperature control way | PID power regulation,instrument of Japan conductive company |
| 5. Temperature accuracy | ±1°C |
| 6. Temperature uniformity | ±5°C |
| 7. Heating element | 0Cr25Al5Fe+Cr resistance wire,spiral |
| 8. Heating element connection | Y |
| 9. Dimensions of Effective work zone | Diameter * length=520*680mm |
| 10. load capacity of 1 batch | 100Kg |
| 11. Operating motor of Furnace chamber | 1 set ,1.5Kw,adjust speed by magnetic |
| 12. Rotating speed | 0.5-8 r/min |
| 13. Tilting motor of furnace body | 0.55KW Hand/electric (all in one) speed reduction unit |
| 14. Max Tilting Angle of furnace body | +/-50 degree |
| 15. No-load power loss | Less than 4KW |
| 16. No-load heating time(Normal Temp:950°C) | About 2.5 hours |
Standard model of SUPER Screw Carburizing Furnace
| Model | Furnace chamber size | Rated power | Rated temperature | Phase | Rated voltage | Load capacity |
| RG-30-9 | D300×L620 mm | 30 kw | 950℃ | 3 | 380-440V | 60KG |
| RG-45-9 | D520×L680 mm | 45 kw | 950℃ | 3 | 380-440V | 100KG |
| RG-60-9 | D600×L750 mm | 60 kw | 950℃ | 3 | 380-440V | 150KG |
| RG-120-9 | D750×L1000 mm | 120 kw | 950℃ | 3 | 380-440V | 300KG |
Super compnay goods service
1. All our furnace have one year warranty. In case of any failure occurred in the warranty period, damaged
parts to be replaced shall be offered free of charge. (note:
transport cost shall be borne by buyer.)
2. We have professional sales and engineer, experienced worker to service you during the whole purchasing trip.
3. Help buyer installation the equipment and free training operator. We provide lifelong tracing service, supply equipment parts and
relevant maintenance of favorable prices, and give user technical guidance free of charge.
