1.Speed /R
The speed at which you use your carbide bur in your rotary tool will depend on the material you're using it on and the
contour being produced but it's safe to say you do not need to
exceed speeds of 35,000 RPM. The table below shows some approximate
speeds.
2.Apply only a little pressure
As with all drill bits and burrs, let the burr do the work and
apply only a little pressure otherwise the cutting edges of the
flutes will chip away or become smooth too quickly, reducing the
life of your burr.
3.Keep The Carbide Burr On The Move
When using your carbide burr try not to keep it still for too long
as this will prevent the burr from digging and jabbing into your
material causing unsightly marks and roughness.
Advantage of our carbide burrs
1.100% quality and brand new.
2.Can Process a variety of metal and non-metal, processing hardness would up to HRA89-92.5
3.In a great part of the work, it can replace the petiole small wheel, and no dust pollution.
4.High production efficiency, the processing efficiency is several times higher than file.
5.High product processing quality, high finish, can process out a various of high-precision mold cavity.
6.Long life, the durability is 10 times higher than high-speed steel cutting tool.
7.Easy to use, safe and reliable, can reduce labor intensity, improve the working environment.
