4V320-08 1/4" BSPT AirTAC Type Pneumatic Solenoid Valve 5/2 Way Directional Control DC24V

4V320-08 1/4'' BSPT AirTAC Type Pneumatic Solenoid Valve 5/2 Way Directional Control DC24V

4V series AirTAC type pneumatic solenoid valve for air, two or three positions, five-way-5/2 (3) -way, double solenoid valve, can be used for voltage DC 12V, DC 24V, AC 110V and AC 220 Volt, Pilot Valve-Operating Mode, Port Size M5 × 0.8, Rc 1/8 ", 1/4", 3/8 "for your choice, fast and safe opening / closing. High reliability and low price. 4V Series AirTAC type solenoid valve is used as a directional control component to change the direction of the working medium to drive the actuator assembly, usually through a cylinder to achieve cyclic movement.

YouTube video of 4V320-08 AirTAC Type 5/2 Way Pneumatic Solenoid Valve:

Main dimension of 4V320-08 G1/4'' Directional Control Solenoid Air Valve:

Details enlargement of 4V320-08 Double Solenoid Air Control Solenoid Valve:

Specifications of 4V300 Series AirTAC Type Electric Control Solenoid Valves:

Factory production of 4V Series AirTAC Type Pneumatic Solenoid Valves:

Working principle of pneumatic solenoid valve:

The solenoid valve is often used to control hydraulic cylinder or pneumatic cylinder. One of the working holes of the 4/2-way or 5/2-way single solenoid valve is a normally open working hole. When the solenoid valve is in the power-off state, the medium directly enters the working hole B from the air (liquid) inlet hole P, which pushes the hydraulic cylinder or the pneumatic piston to the C end. Solenoid valve for hydraulic or pneumatic cylinder,wWhen the solenoid valve is powered on, the direct-acting 4/2-way or 5/2-way solenoid valve directly lifts the iron core valve stem to close the working hole B. The gas or liquid of the pressure source flows to the working hole A, to make the piston of the pneumatic (hydraulic) cylinder push to the D end. The direct-acting solenoid valve can be used universally for air and liquid.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt

√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for

√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on