NBRE-5000 Lab Rotary Evaporator 0.098Mpa For Vacuum Oil Extraction
Brief introduction of Lab Rotary Evaporator
Rotary evaporator use stepless speed to make the glass rotating
bottle constant rotation, the material in the bottle wall to form a
large area of uniform film, and then through the intelligent
constant temperature water bath heat the rotating bottle uniformly,
high-speed evaporation under vacuum case, after the efficient glass
condenser cooling, the solvent vapor will recycle in the collection
bottle.
Features of Rotary evaporator:
• The main bracket is made of stainless steel and aluminum alloy
with reasonable structure and materials.
• All glass components are borosilicate glass (GG-17), high
temperature, anti-corrosion.
• Sealing system adopts imported fluorine rubber and Teflon two-way
combination seal, long corrosion-resistant life, to maintain a high
degree of vacuum.
• Vacuum gauges show real-time vacuum, oil-based table with
anti-vibration characteristics.
• Upright three-layer serpentine coil condenser, main cooler +
double cooler, ensuring high recovery.
• Continuous feeding for customer's convenience, valve type feeding
valve socket PTFE tube.
• Collecting bottles are equipped with dropping materials to
facilitate the collection and discharge of evaporated extracts.
• Check valve control, continuous discharge, the machine in working
condition, the vacuum switch.
• All valves use the latest integrated hand wheel valve, sealing is
good, the operation is more simple and convenient
Microprocessor-based power switch control.
• LCD full screen display, temperature, speed dual digital display,
bath thermostat intelligent control, PT100-type sensor, quickly and
accurately transfer temperature.
• Brushless DC motor, stable rotation, no spark, slow down by
force.
• Bath electric lift, lift part of the deceleration by force motor,
lifting process more stable.
• The pot is made of high-quality 304 stainless steel,
corrosion-resistant and durable. The outer layer of the pot is
covered with a silicone layer, which makes it safer to use at high
temperature.
• Over-temperature protection function, when the actual temperature
exceeds the set temperature of 5 ℃, the machine will automatically
power-off heating.
• Anti-dry function, the heating pot lower than the heating pipe,
the machine will automatically power off.
• If there is a sudden power failure while the machine is working,
the machine will stop heating automatically when the power is
turned on again.
| Power supply | 380V/50HZ (various power supply and plug can be customized) |
| Rotating motor power | 100W |
| Lifting motor power | 60W |
| Heating power | 8KW |
| Vacuum degree | 0.098Mpa |
| Rotating flask capacity | 50000ml Φ470mm/Φ125mm flange mouth |
| Collecting flask capacity | 20000ml Φ355mm/Φ60mm flange mouth |
| Rotating speed | 0-120rpm/min |
| Temperature controlling range | 0-400℃ |
| Temperature controlling accuracy | ±1℃ |
| Glass temperature range | -80-250℃ |
| Lifting stroke | 0-180(mm) |
| Condenser size | MainΦ160×840H(mm) DeputyΦ160×480H(mm) |
| Feed valve | Φ35 flange mouth |
| Release valve | Φ35 flange mouth*2pcs |
| Discharge valve | ￠15mmglass and lean discharge port |
| Bath size/volume | Φ550×320H(mm) about76L |
| Dimension | 1400*600*2250(mm) |
| Packing size | 1270L×620W×1440H(mm) about1.133m3 |
| Gross weight | 118KG |
Company Introduction
Factory Show of Rotary Evaporator
Certificate of Rotary Evaporator
Our Services of Rotary Evaporator
