1-1/2 Inch Right Angle Pneumatic Pulse Valve BFEC Type With
Aluminum Alloy Body
DMF-Z-40S Double Diaphragm Valve has good sealing performance, safe
and reliable. Controlled by the output signal of the pulse jet
controller, they realize jetting dust cleaning for the bag filter
row by row (or chamber by chamber) to keep the operating resistance
of the bag-house within the set range, thus guaranteeing the high
processing ability and dust-collecting efficiency of the bag-house.
With good resistance to moisture and corrosion. Precision cast with
high quality aluminum alloy, the valve is durable for long term
use.Angle between inlet and outlet is 90°. Suitable for connecting
air tank with blowing tubes for bag filters. With a smooth air
flow, they can provide efficient dust-cleaning air pulse.
DMF: Solenoid Diaphragm Pulse Jet Valve.
Z: Right Angle , Angle between inlet and outlet is 90°.
40: Port Size is 1-1/2''
S: Double Diaphragm
DMF-Z-40S Solenoid Pulse Valve Technical Data:
| Model Number | DMF-Z-40S |
| Port Size | G1-1/2'' |
| Number of Diaphragm | 2 |
| KV | 45.82 |
| CV | 53.47 |
| Working Pressure | 0.1~0.8Mpa |
| Temperature Range | -25℃ to +80℃ |
| Relative Humidity of Air | ≤85% |
| Protection Class | IP65 |
| Voltage | AC220V, AC110V, AC24V, DC24V |
Overall Dimension of DMF-Z-40S Electromagnetic Solenoid Valve :
Deconstruction of AC220V AC110V AC24V DC24V Aluminum Body Pulse
Valve DMF-Z-40S:
| Part Name | Material |
| Valve Body | Aluminum Alloy |
| Diaphragm | NBR ,All Available |
| Seals | NBR, HNBR, FKM, EPDM, Silicone, All Available |
| Armature Tube | Stainless Steel |
| Coil | Copper Wire |
Details About DMF-Z-40S Double Diaphragm Solenoid Electric Pluse
Valve :
More details about DMF-Z-40S Solenoid Pulse Valve On YOUTUBE :
Main Type of Solenoid Valve :
Y type electro-magnetic pulse valves are embedded valves (also
called submerged ones) which are directly installed on the manifold
box. They have better flow characteristics and operate with reduced
pressure loss, therefore, they are suitable for conditions where
the pressure of the gas source is relatively low.
Z type electro-magnetic pulse valves is a right-angle valve, with
the 90 degree angle between the inlet and outlet, which is suitable
for the installation connection between the gas dome and the
baghouse blow tube to provide good air flow and dust clean pulses
satisfying the requirements.
ZM type(with 2nuts) electro-magnetic pulse valves are the
right-angle valve same as Z type which is suitable for the
installation connection between the gas dome and the baghouse blow
tube. There are fixed nut at both ends which make it easy to
install and use the valve.
T type electro-magnetic pulse valves are the straight valve inline,
with the 180degree angle between the inlet and outlet, which is
suitable for the installation connection between the inlet and gas
dome, outlet and the blow tube to provide good air flow and dust
clean pulses satisfying the requirements.
Installation diagram About DMF Series Pulse Jet Valve :
Welcome to your any question and inquiry!
