NQ Impregnated diamond bit Turbo Type for wireline coring drilling
( Mineral Exploration)
Recommended for competent rock, hard and compact formations.
• Good fluid and cuttings evacuation to keep the waterways clean.
• It provides greater penetration rates in most competent
formations.
Description:
Our diamond core bits are ideally suited to modern drilling
conditions. The impregnated diamond core bits are designed and
manufactured to give optimum productivity and bit life, required to
maintain cost efficiency for your drilling application.
Impregnated diamond core bits are the most commonly useful bits in
the mineral exploration industry, as they have the widest range of
application. The carefully selected grades of high quality
synthetic diamond are distributed in the depth of impregnated bit's
matrix series. The matrix layer of the "CHINA GEOLOGICAL EQUIPMENT
GROUP" contains a uniform distribution of these crystal that are
embedded in a powdered metal bond.
Assure diameter of Impregnated bit
| Type | Core bit |
| Outer Diameter | Inner Diameter |
| Inch | mm | Inch | mm |
| BTW | 2.345 | 59.56 | 1.667 | 42.35 |
| NTW | 2.965 | 75.31 | 2.218 | 56.35 |
| HTW | 3.762 | 95.57 | 2.809 | 71.35 |
| A/WL | 1.875 | 47.63 | 1.062 | 26.97 |
| B/WL | 2.345 | 59.56 | 1.433 | 36.4 |
| B/WL-3 | 2.345 | 59.56 | 1.32 | 33.53 |
| N/WL | 2.965 | 75.31 | 1.875 | 47.63 |
| N/WL-3 | 2.965 | 75.31 | 1.775 | 45.08 |
| H/WL | 3.762 | 95.57 | 2.5 | 63.5 |
| H/WL-3 | 3.762 | 95.57 | 2.406 | 61.11 |
| P/WL | 4.805 | 122.05 | 3.345 | 84.96 |
| P/WL-3 | 4.805 | 122.05 | 3.27 | 83.06 |
| T2-56 | 2.205 | 56 | 1.642 | 41.7 |
| T2-76 | 2.992 | 76 | 2.429 | 61.7 |
| T2-86 | 3.385 | 86 | 2.823 | 71.7 |
| T2-101 | 3.976 | 101 | 3.295 | 83.7 |
| T6-101 | 3.976 | 101 | 3.11 | 79 |
| T6-131 | 5.157 | 131 | 4.252 | 108
|
Features:
• Significantly outperforms the successful Series range in drilling
speed and bit life.
• Protects the diamond from oxidation and surface degradation.
• Inhibits the premature "pull-out" of the diamond.
• Available in multiple standard configurations and selected on the
basis of relative rock hardness and ground conditions.
Size Available:
A-Gauge Core Bits: AQ, AQ-RSG, AWG(AX), AWM, AWT, LTK48
B-Gauge Core Bits: BQ, BQ-RSG, BQ-2.400, BQ3, BWG(BX), BWM, BWT,
LTK60, TBW
N-Gauge Core Bits: NQ, NQ-RSG, NQ-3.032, NQ2, NQ2-RSG, NQ3/NQTT,
NQ3-RSG, NQ3-3.032, NMLC, NWG(NX), NWM, NWT, TNW,
H-Gauge Core Bits: HQ, HQ-RSG, HQ-3.830, HQ-3.895, HQ3/HQTT,
HQ3-RSG, HQ3-3.895, HMLC, HWF-Long, HWF-Short, HWG(HX), HWT |
"Q" series: AQ, BQ, NQ, HQ, PQ/AQTK, BQTK, BQ3, NQ2, NQ3, NQTT,
HQ3, HQTT, PQ3, PQTT
T2 series: T2 46, T2 56, T2 66, T2 76, T2 86, T2 101
T6 series: T6 76, T6 86, T6 101, T6 116, T6 131, T6 146, T6S 101,
T6S 116
T series: T36, T46, T56, T66, T76, T86
Z series: Z46, Z56, Z66, Z76, Z86, Z101, Z116, Z131, Z146
B series: B36, B46, B56, B66, B76, B86, B101, B116, B131, B146
