Next Generation Network Packet Broker Improving Tool Efficiency and
Performance
1. Features
- A full visual control of Data Acquisition device(32*40/100GE
QSFP28 ports)
- A full Data Scheduling Management device(32*100GE duplex Rx/Tx
processing)
- A full pre-processing and re-distribution device(bidirectional
bandwidth 3.2Tbps)
- Supported collection & reception of link data from different
network element locations
- Supported collection & reception of link data from different
switch routing nodes
- Supported raw packet collected, identified, analyzed,
statistically summarized and marked
- Supported to realize irrelevant upper packaging of Ethernet
traffic forwarding, supported all kinds of Ethernet packaging
protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, -
PPTP etc. protocol packaging
- Supported raw packet output for monitoring equipment of BigData
Analysis, Protocol Analysis, Signaling Analysis, Security Analysis,
Risk Management and other required traffic.
- Supported real-time packet capture analysis, data source
identification
2. Intelligent Traffic Processing Abilities
ASIC Chip Plus Multicore CPU
High-density intelligent network packet broker uses a dedicated
ASIC chip solution. It can meet the simultaneous line-speed data
transmission and reception of 32 x 100G ports, and up to 3.2TGbps
of traffic processing capability, meeting the needs of users for
centralized collection and simple pre-processing of network link
data.
100GE Traffic Capture
High-density intelligent network packet broker supports
split-and-mirror deployment access mode. 32 x 100G interfaces are
QSFP28 slots and are backward compatible with 40G. They can match
different types of modules and have high compatibility and
scalability.
APP Layer Protocol Identify
Supported commonly used application layer protocol identification,
such as FTP, HTTP, POP, SMTP, DNS, NTP, BitTorrent, Syslog, MySQL,
MsSQL and so on
Online Chat Tools Identify
Supported identify Instant Messaging Protocol, such as: Messager,
WhatsAPP, Skype, Wechat, QQ, Alitalk, etc. According to user
configuration, the traffic output policy can be implemented.
NetTAP® Network Visibility Platform
Supported NetTAP® Matrix-SDN Visual Control Platform Access
1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System
NT-FTAP-32QCX Network TAP NPB.pdf
3. Typical Application Structures
Centralized Collection Replication/Aggregation Application(as
following)
The above figure is one of the typical applications of
NT-FTAP-32QCX: through the core switch image acquisition and link
splitting acquisition, the original data traffic of multiple key
nodes in the network is connected to the NT-FTAP-32QCX centralized
acquisition. Then, the received data is identified, classified,
counted, and traced. The data that the user cares or does not care
about is matched and filtered according to the requirements, and
finally, the processed traffic is sent to the back end in various
ways such as analytical monitoring system.
4. Specifications
| NT-FTAP-32QCX NetTAP® Network TAP Network Packet Broker Functional Parameters |
| Network Interface | 100G(compatible with 40G) | 32*QSFP28 slots |
| Out band interface | 1*10/100/1000M cooper |
| Deploy mode | Fiber tap | Support |
| Mirror span | Support |
| System function | Traffic processing | Traffic replicating/aggregating/splitting | Support |
| Load-balancing | Support |
| Filter based on IP/protocol/port quintuple traffic identification | Support |
| UDF Matching | Support |
| Single fiber transmission | Support |
| Ethernet package independence | Support |
| Processing ability | 3.2Tbps |
| Management | CONSOLE MGT | Support |
| IP/WEB MGT | Support |
| SNMP MGT | Support |
| TELNET/SSH MGT | Support |
| SYSLOG Protocol | Support |
| RADIUS or AAA Centralized authorization | Support |
| User authentication | Authentication based on username and password |
Electrical (1+1 Redundant Power System-RPS) | Rated power supply voltage | AC110~240V/DC-48V[Optional] |
| Rated power frequency | AC-50HZ |
| Rated input current | AC-3A / DC-10A |
| Rated function power | Max 450W |
| Environment | Operating temperature | 0－50℃ |
| Storage temperature | -20-70℃ |
| Working humidity | 10%-95%, No condensation |
| User Configuration | Console Configuration | RS232 interface,115200,8,N,1 |
| Password authentication | Support |
| Chassis Height | Rack Space (U) | 1U 445mm*44mm*505mm |
