Semiconductor CdZnTe Substrate Used For Diodes And Transistors, Ir
Optical Window Or Disks, Opitical Components
Product Description
Single crystal (Ge)Germanium Wafer
PAM-XIAMENoffers semiconductor materials,Ge(Germanium) Single Crystals and Wafers grown by VGF / LEC
General Properties of Germanium Wafer
| General Properties Structure | Cubic, a = 5.6754 Å |
| Density: 5.765 g/cm3 |
| Melting Point: 937.4 oC |
| Thermal Conductivity: 640 |
| Crystal Growth Technology | Czochralski |
| Doping available | Undoped | Sb Doping | Doping In or Ga |
| Conductive Type | / | N | P |
| Resistivity, ohm.cm | >35 | < 0.05 | 0.05 – 0.1 |
| EPD | < 5×103/cm2 | < 5×103/cm2 | < 5×103/cm2 |
| < 5×102/cm2 | < 5×102/cm2 | < 5×102/cm2 |
Grades and Application of Germanium wafer
| Electronic Grade | Used for diodes and transistors, |
| Infrared or opitical Grade | Used for IR optical window or disks,opitical components |
| Cell Grade | Used for substrates of solar cell |
Standard Specs of Germanium Crystal and wafer
| Crystal Orientation | <111>,<100> and <110> ± 0.5o or custom
orientation |
| Crystal boule as grown | 1″ ~ 6″ diameter x 200 mm Length |
| Standard blank as cut | 1″x 0.5mm | 2″x0.6mm | 4″x0.7mm | 5″&6″x0.8mm |
| Standard Polished wafer(One/two sides polished) | 1″x 0.30 mm | 2″x0.5mm | 4″x0.5mm | 5″&6″x0.6mm |
Special size and orientation are available upon requested Wafers
Specification of Germanium Wafer
| Item | Specifications | Remarks |
| Growth Method | VGF | |
| Conduction Type | n-type, p type, undoped | |
| Dopant | Gallium or Antimony | |
| Wafer Diamter | 2, 3,4 & 6 | inch |
| Crystal Orientation | (100),(111),(110) | |
| Thickness | 200~550 | um |
| OF | EJ or US | |
| Carrier Concentration | request upon customers | |
| Resistivity at RT | (0.001~80) | Ohm.cm |
| Etch Pit Density | <5000 | /cm2 |
| Laser Marking | upon request | |
| Surface Finish | P/E or P/P | |
| Epi ready | Yes | |
| Package | Single wafer container or cassette | |
| 4 inch Ge wafer Specification | for Solar Cells | |
| Doping | P | |
| Doping substances | Ge-Ga | |
| Diameter | 100±0.25 mm | |
| Orientation | (100) 9° off toward <111>+/-0.5 |
| Off-orientation tilt angle | N/A | |
| Primary Flat Orientation | N/A | |
| Primary Flat Length | 32±1 | mm |
| Secondary Flat Orientation | N/A | |
| Secondary Flat Length | N/A | mm |
| cc | (0.26-2.24)E18 | /c.c |
| Resistivity | (0.74-2.81)E-2 | ohm.cm |
| Electron Mobility | 382-865 | cm2/v.s. |
| EPD | <300 | /cm2 |
| Laser Mark | N/A | |
| Thickness | 175±10 | μm |
| TTV | ＜15 | μm |
| TIR | N/A | μm |
| BOW | <10 | μm |
| Warp | ＜10 | μm |
| Front face | Polished | |
| Back face | Ground | |
Germanium Wafer Process
In the germanium wafer production process, germanium dioxide from
the residue processing is further purified in chlorination and
hydrolysis steps.
1)High purity germanium is obtained during zone refining.
2)A germanium crystal is produced via the Czochralski process.
3)The germanium wafer is manufactured via several cutting,
grinding, and etching steps.
4)The wafers are cleaned and inspection. During this process, the
wafers are single side polished or double side polished according
to custom requirement, epi-ready wafer comes.
5)The wafers are packed in single wafer containers, under a
nitrogen atmosphere.
Application:
Germanium blank or window are used in night vision and
thermographic imaging solutions for commercial security, fire
fighting and industrial monitoring equipment. Also, they are used
as filters for analytical and measuring equipment, windows for
remote temperature measurement, and mirrors for lasers.
Thin Germanium substrates are used in III-V triple-junction solar
cells and for power Concentrated PV (CPV) systems.
