Inconel 601 is Nickel Chromium, solid solution strengthened alloy
with good resistance to oxidation and corrosion at high
temperatures. It also has excellent hot and cold workability and
welding performance. When below 700ºC, it has good heat resistance
and high ductility. Inconel 600 can be strengthened by cold
working. It can be connected via resistance welding, solvent
welding and brazing. It is suitable for producing antioxidant parts
which bear low load below 1100ºC.Good resistance of reduction,
oxidation and corrosion of nitride dielectric Good resistance of
dry chlorine and hydrogen chloride gas corrosion Excellent
mechanical behavior below zero degree and at atroom temperature and
high temperature
Chemical Composition
| Inconel 600 | Ni | Cr | Fe | C | Mn | Si | Cu | Al | Ti | B | P | S |
| minimun | | 14 | 6.0 | | | | | | | | | |
| maximum | 72 | 17 | 10.0 | 0.15 | 1.0 | 0.5 | 0.5 | 0.3 | 0.3 | 0.006 | 0.015 | 0.015 |
| Product Form | Size Range From | Size Range To |
| Alloy C276 Coil | 1.6 mm | 3.05 mm |
| Alloy C276 sheet & plate | 0.63 mm | 76.2 mm |
| Alloy C276 round tubing | 0.25 in | 1 in |
| Alloy C276 round bar | 3.175 mm | 280 mm |
| Alloy C276 pipe fitting | 0.5 in | 24 in |
| Alloy C276 pipe | 0.5 in | 24 in |
| Alloy C276 flanges | 0.5 in | 24 in
|
Product form
All products of the company according to the United States
ASTM/ASME, Germany DIN, Japan JIS standard supply, with China's
national steel executive standard synchronization, and can supply
according to the standards and technical requirements of the
customers, for product shape: plate, belt, tubes, rods, forgings,
pipe fittings, flanges, welding materials, etc..
Super austenitic stainless steel series: 904 l (UNS N08904, 1.4539)
254 smo/SMO254 (UNS S31254, 1.4547), 1.4529 (UNS N08926, 25-6 mo)
AL - 6 xn (UNS N08367)
Hartz alloy series (HASTELLOY) : hartz alloy C - 276 (UNS N10276,
2.4819) hartz alloy C - 22 (2.4602) UNS N06022, hartz alloy C - 4
(2.4610) UNS N06455, hartz alloy C - 2000 (UNS N06002, 2.4675)
hartz alloy B - 2 (2.4617) UNS N10665, hartz alloy B - 3 G (UNS
N10675, 2.4600) hartz alloy - 30 G - 35 (UNS N06030) hartz alloy
(UNS N06035)
Special dual phase steel series: 2205 (UNS S31803, S32205, 1.4462)
2304 (UNS S32304, 1.4362) 2507 (UNS S32570, 1.4410)
| % | NI | CR | MO | W | CO | C | MN | SI | P | S | FE | V |
| Min | Balance | 14.5 | 15 | 3 | 0 | 0 | 0 | 0 | 0 | 0 | 4 | 0 |
| Max | Balance | 16.5 | 17 | 4.5 | 2.5 | 0.01 | 1 | 0.08 | 0.04 | 0.03 | 7 | 0.35
|
: cobalt base alloy GH188, GH605, GH783
Soft magnetic alloy: 1 j22, j36, 1 j50, 1 j76, 1 j77, 1 j79, 1 j85
Permanent magnet alloy, 2 j4, 2 j21-serial open-style, j31, 2 j63,
2 j83
Corrosion resistant alloy: NS111, NS112, NS113, NS131, NS141,
NS142, NS143, NS311, NS312, NS313, NS314, NS315, NS321, NS322,
NS331, NS332, NS333, NS334, NS335, NS336, NS337, NS341, NS411
monel:
MONEL400,UNS N04400,2.4360)(MONEL500,UNS N05500,2.4375)
inconel,incoloy:
(INCONEL600,UNS N06600,2.4816)(INCONEL601,UNS
N06601,2.4851)(INCONEL686,UNS N06686,2.4606)(INCONEL690,UNS
N06690,2.4642)(INCONEL718,UNS N07718,2.4668)(INCONEL750,UNS
N07750,2.4669)(INCONEL725,UNS N07725)(INCONEL617,UNS
N06617,2.4663)(INCOLOY800,UNS N08800,1.4876)(INCOLOY800H,UNS
N08810,1.4876)(INCOLOY800HT,UNS N08811,1.4876)(INCOLOY825,UNS
N08825,2.4858)(INCOLOY925,UNS N09925)(INCOLOY20,UNS
N08020,2.4660)(INCOLOY28,UNS N08028,1.4563)(INCOLOY330,UNS
N08330,1.4886)
Sales area:
Power plant desulfurization denitration, petrochemical equipment,
chemical, fluorine chemical industry, fine chemical, PTA,
environmental protection, water desalination, papermaking
machinery, pharmaceutical equipment, heat exchange equipment,
electrochemical, nuclear power, metallurgy, Marine platform,
chlor-alkali, shipbuilding, cement manufacturing, explosion
composite, acetic anhydride, acetic acid salt, medical equipment,
sports leisure and plate heat exchanger, bellows expansion joint
compensator, etc.
| Grade | C | Si | Mn | S | P | Cr | Ni | Fe | Al | Ti | Cu | Mo | other |
| Inconel 600 | ≤0.15 | ≤0.5 | ≤1.0 | ≤0.015 | ≤0.03 | 14.0-17.0 | balance | 6.0-10.0 | --- | --- | ≤0.5 | --- | --- |
| Inconel 601 | ≤0.10 | ≤0.5 | ≤1.0 | ≤0.015 | ≤0.03 | 21.0-25.0 | balance | 10.0-15.0 | 1.0-1.70 | --- | ≤1.0 | --- | --- |
| Inconel 625 | ≤0.10 | ≤0.5 | ≤0.5 | ≤0.015 | ≤0.015 | 20.0-23.0 | balance | ≤5.0 | ≤0.4 | ≤0.4 | --- | 8.0-10.0 | Co≤1.0 |
| Inconel 718 | ≤0.08 | ≤0.35 | ≤0.35 | ≤0.015 | ≤0.015 | 17.0-21.0 | 50.0-55.0 | balance | 0.2-0.8 | 0.65-1.15 | ≤0.3 | 2.8-3.3 | B≤0.006 |
| Inconel x-750 | ≤0.08 | ≤0.5 | ≤1.0 | ≤0.010 | ≤0.020 | 14.0-17.0 | balance | 5.0-9.0 | 0.4-1.0 | 2.25-2.75 | --- | --- | --- |
