High Speed Scale Marking Laser Control Board Fiber Laser Type For
Control System
Description:
main feature
Standard DB25 connector, can be wire to IPG laser directly.
Galvo control signal is digital, which can be connect to most
scanhead directly.
on-the-fly marking feature. A encoder can be used to surveillance
the pipeline speed
real-timely.
Multiple boards on 1 computer: One computer can control up to 8
control board to mark
different pattern simultaneously
Extension axis(step motor or sever motor): two set of
direction/pulse signal can be used to
control 2 step(server) motors.
16 general input signals(TTL campatible): In0-In13, XORG0(IN14),
YORG0(IN15).
8 general output signals(TTL campatible): Out0-7 coming out of
Con5. Out0 - 3 are TTL
outputs. Out4-7 can be configured as OC outputs or TTL outputs.
LaserErr signal: this signal will be activated when there is an
error occurs in the laser, OC
output.
Remark function: this function is used to remark what ever is in
the memory of the board,
especially convenient for high speed marking of a same pattern.
Compatible with USB2.0 specifications.
Applications:
- Laser Marking
- Laser Engraving
- Rapid prototyping
- Drilling circuit board via holes
- Cutting cloth
- Cutting paper
Applications:
| Mechanical parameters |
| Storage temperature: -20℃ ~ + 60 ℃ |
| Working temperature:25℃ ± 10℃ |
| DB9 male/female sockets | USB cable (1.5m) |
| DB15 male/female sockets | DB25 cable (1.5m) |
| DB25 male/female sockets | |
