Computerized Universal Tensile Testing Machine Steel Laboratory
Equipments
Universal Tensile Testing Machine INTRODUCTION:
Tensile testing machines are universal testing machines specially
configured to evaluate tensile strength of specimens. Our tensile
testers will measure characteristics such as ultimate tensile
strength, yield strength, elongation and modulus. Each tensile test
machine is configured to your testing needs by our application
engineers with the correct controller, grips, and accessories. Due
to our modular machine design, your tensile tester can also be
equipped to perform other applications such as compression, cyclic,
shear, flexure, bend, peel, and tear just by adding fixtures.
Universal Tensile Testing Machine SPECIFICATIONS:
| Model | TZ-D200 |
| Capacity to choose | 1kg,2kg,5kg,10kg,20kg,50kg,100kg(Choose a set) |
| Sensor type | Model S high precision sensor |
| Display | Computer display mode |
| Power unit | kgf,gf,N,kN,lbf |
| Length unit | mm,cm,Inch |
| Stress unit | MPa,kPa,kgf/cm2,lbf/in2 |
| Stroke resolution | 1/500,000 |
| Force accuracy | ±0.5% |
| The experimental speed | 1—500mm/min(adjustable) |
| effective travel | 500mm |
| Test space | 120mm |
| Stop mode | Overload stop, emergency stop key, automatic stop of specimen
failure, automatic stop of upper and lower limit setting, automatic
reset |
| output | microwriter |
| motor drive | Servo motor + servo driver |
| Mechanical transmission | Imported synchronous wheel, synchronous belt + high precision ball
screw |
| The machine power | 200W |
| The machine size(W*D*H) | 400mmx350mmx1120mm |
| Use the power supply | 220V 50Hz |
| The standard configuration | A set of fixtures, a power cord, a manual |
Universal Tensile Testing Machine Application:
Applied in machinery, metallurgy, construction, transportation,
aviation, aerospace, shipping, ceramics, automotive, pharmaceutical
and electronics industries.Applied in machinery, metallurgy,
construction, transportation, aviation, aerospace, shipping,
ceramics, automotive, pharmaceutical and electronics industries.
Test Software Description:
Software support: simplified Chinese, traditional Chinese, English
support, 3 types: SI international standard units, kg-cm units,
lb-inch British system units, 6 kinds of commonly used units:
n-mm-mpa, kn-mm-mpa, gf-cm-kgf/cm2, kgg-cm-kgf /cm2, lb-inch-kpsi,
kp-inch-kpsi, easy to switch units. Meet the use of different
regional standards.
Function:
1. The base is supplemented by aluminum alloy profile column
treated by advanced plastic spraying;
2. Adopt high precision, no gap ball screw and timely gauge belt as
the guarantee of transmission system accuracy;
3. Fully computerized data collection and motion control;
4. Test software under the Windows XP operating system, users can
use the existing functions of the software to complete the
mechanical test project, or edit the test method according to their
own actual needs;
5. The force measurement accuracy is better than 0.5, and the
resolution of force value is 1/500000.
