60Khz Ultra Spot Welding Multi Point Power Control by Digital
Intelligent Driving System
Description:
Compared with traditional ones, Qianrong Ultrasonic Wire Embedder
has been greatly improved. The improved Ultrasonic Wire Embedder
has greatly improved product performance, more stable work and
stronger automatic frequency adaptability. , And the appearance is
more beautiful.
For ordinary ultrasonic wire embedders, as the tool head of the
wire is worn, the frequency will inevitably change (the product
size determines the product frequency). When the frequency changes
to a certain extent, it is difficult for the generator to find the
frequency of the tool head, which affects the entire The ultrasonic
system works normally. At this time, only the new wire bonding tool
head must be replaced.
Qianrong ultrasonic wire buried device solves this problem to a
large extent. Even if the tool head is worn to a certain degree,
the generator can automatically search and find the change of the
frequency of the ultrasonic vibrator, thereby ensuring the stable
operation of the entire ultrasonic system. The service life of the
head will be extended by 2-3 times, which truly saves the cost for
the majority of users. It has 30% more power than traditional
ultrasonic wire buried devices, and solves the problem of heat
generation of ultrasonic generator and vibrator, which can work for
a long time.
Specifications:
| Type | QR-W60A |
| Frequency(KHz) | 60KHz |
| Trigger | External control or manual control |
| welder head | wear-resisting alloy steel above HRC55° |
| Threading hole | Φ0.3mm or Φ0.5mm |
| Power code | 2M or 5M |
| Generator | Digital generator V6.6 or analog generator ZJS-100 |
| Generator Size | 280*320*140mm(V6.6) 280*320*150mm(ZJS-100) |
| Cover dimension | Φ25X100mm |
| Cover material | Nylon or aluminum |
| Cooling way | compressed air cooling (Φ4mm conduit) |
| Speed | 0.1-0.3m/s |
| Thread fixed cycle | length 60000 m/s |
Main features:
1. Intelligent frequency search: Automatic frequency adaptation
function, prolong the service life of buried head.
2. Installation method: single cabinet, combined cabinet, can
control eight buried heads to work at the same time.
3. Control mode: Multi-point point energy fine adjustment, external
PLC / computer signal control, easier operation.
4. Button-based function: The welding energy can be adjusted
according to the thickness and hot meltability of the welding
material.
5. Self-test function: fault display and error alarm signal.
6. Product appearance: The volume design is lightweight, beautiful
and durable, and the heat dissipation performance is good.
7. Stability: long-term work, uniform energy output
60Khz Ultra Spot Welding Multi Point Power Control by Digital
Intelligent Driving System
